Cub Cadet GT 3200 warranty Adjustments and Maintenance

Page 20

SECTION 6: ADJUSTMENTS and MAINTENANCE

Seat Adjustment

WARNING: Do not adjust the seat when the tractor is moving, as this could cause the operator to lose control of the tractor.

For the comfort of the operator, the tractor is equipped with an easy to operate adjustable seat. There are also three seat mounting positions to provide additional adjustment.

To adjust the seat forward or back, slide the seat adjustment lever to the left; reposition the seat to your most comfortable position; and release the seat adjustment lever. See Figure 12.

Seat

Adjustment

Lever

Figure 12

If additional adjustment is desired, flip the seat forward, remove the four screws fastening the seat, and re- mount the seat on the hinge brackets as follows (See Figure 13):

Seat

Rearward

Seat Hinge

 

 

Seat

Bracket

 

Forward

Figure 13

 

•Seat forward-use front two holes.

•Seat middle-use middle two holes.

•Seat rearward-use rear two holes

Brake Inspection and Adjustment

During normal operation, the tractor brake is subject to minimal wear. How- ever, the brake should be periodically tested, and adjusted if necessary.

Checking the Brake.

Place the tractor on a firm and level surface. Stop the engine and remove the ignition key.

Pull and lock the transmission release rod in the “Transmission Released” position. Perform the following checks: NOTE: The tractor may be difficult to push because of the hydro transmis- sion’s braking action.

•Engage the parking brake. If the tractor can be pushed forward or rearward, the braking force must be increased.

•Release the Parking Brake Lever. If the tractor cannot be pushed forward or rearward, the braking force must be decreased.

Turning Radius Adjustment

This tractor is equipped with hydraulic power steering which is set at the factory. The turning radius should be equal for both left and right hand turns. If adjustment is necessary please contact your authorized Cub Cadet dealer.

Accessing Engine Compartment

The engine compartment can be accessed by raising the hood as follows:

•Lift the hood straight upward at the recessed notches of the side panels to disengage the internal hood latch.

•Carefully pivot the hood forward to open.

To close the hood:

•Carefully pivot the hood rearward to lower.

•Push down on the front of the hood to engage the internal hood latch.

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents OPERATOR’S Manual Series 3000 Tractor Model GTTable of Contents To the OwnerGeneral Operation When you see this symbol. Heed ITS WarningImportant Safe Operation Practices Never carry passengers Slope OperationDo Not Do not use a grass catcher on steep slopesChildren Be alert and turn machine off if a child enters the areaService General ServiceTowing Safe Handling of GasolineNever tamper with factory setting of engine governor Do Not Modify EngineSpark Arrestor Average Useful LifeSlope Guide Sight and hold this level with a vertical treePosition the High Back Seat Deck Front Lift Rod AssemblyTractor Preparation Controls and Features Low Fuel Indicator Lamp Indicator Panel/Hour MeterSteering Wheel LCD Hour Meter DisplayButton Key Switch ModuleIndicator Light PTO Switch 12V Power OutletSeat Adjustment Lever Parking Brake Lever Forward PedalLower Raise Safety Interlock Switches OperationChoke Lever Starting The EngineDriving The Tractor Setting The Cruise ControlStopping The Engine Using the Hydraulic Lift System Driving On SlopesStopping The Tractor Auxiliary HydraulicsUsing the Reverse Caution Mode key position Reverse Caution ModeMowing Using The DrawbarEngaging Differential Lock Adjustments and Maintenance Checking Transmission Oil Level Operating Transmission Range Oil Fill Tube DipstickTire Inflation Battery MaintenanceBattery Storage Maintenance Chart Operation toBe performed Grease front wheel bearingsLubrication Illustration Service General Battery InformationBattery Removal Charging the BatteryHeadlight Bulb Replacement Adding Transmission Oil Dipstick must be installedAll times when the engine is Securely into the fill tube atChanging Transmission Oil Adjusting the Brake Electrical BoxFuse Front Wheel AlignmentChanging the Engine Oil and Filter AssemblyHex Shaped Flange Hex Nylon Lock Nut If using a fuel stabilizer Off-Season StorageMANUFACTURER’S Warranty Coverage OWNER’S Warranty ResponsibilitiesEngine Information CoverageMaintenance and Repairs Requirements LimitationsAdding Engine Oil Cleaning The EngineChecking Engine Oil Level Changing Engine Oil Changing Fuel Filter Changing Air CleanerSparkplugs Servicing Oil Cooler Servicing The PrecleanerServicing The Paper Element Trouble Shooting Lack of PowerHard To Start Engine Operates Irregularly or KnocksOptional Equipment Description Model NumberSpecifications TiresBrakes Oil Filter Cartridge Crank Case CapacityReplacement Parts PRE-CLEANERDescription Part Number CartridgeGeneral Emissions Warranty Coverage Warranted Parts GDOC-100092 REV. a MTD Products Limited, Kitchener, on N2G 4J1, Phone Transportation charges and service callsU.S.A Canada
Related manuals
Manual 48 pages 30.97 Kb

GT 3200 specifications

The Cub Cadet GT 3200 is a powerful garden tractor that combines robust performance with innovative technology, making it ideal for homeowners and landscapers alike. This formidable machine is equipped with a heavy-duty Kohler engine, offering a variety of horsepower options to meet diverse needs. Whether used for mowing large lawns or tackling tough garden tasks, the GT 3200 proves to be a reliable workhorse.

One of the highlights of the GT 3200 is its Hydrostatic transmission, which provides seamless speed control without the need for manual gear shifting. This feature allows operators to easily navigate varying terrains, ensuring smooth operation in both forward and reverse. The precision steering system enhances maneuverability, making it easier to negotiate tight spaces and garden beds.

The GT 3200 boasts a cutting deck available in various sizes, including 48-inch and 54-inch options. This adaptability enables users to choose the size that best fits their mowing requirements. The deck is designed for efficiency, with dual-blade construction that delivers a clean, even cut across different grass types and terrain. Additionally, the deck’s adjustable cutting height allows for customized results, catering to users' specific aesthetic preferences.

Another notable characteristic of the Cub Cadet GT 3200 is its modular design, which allows for easy attachment of various implements. This versatility makes the GT 3200 suitable for multiple tasks, from mowing to snow clearing or tilling, as it can be equipped with a range of attachments such as snow blowers, front blades, and garden tillers.

Cub Cadet has integrated advanced technology in the GT 3200, including a digital gauge cluster that provides vital information at a glance, such as fuel levels and engine performance metrics. This technology enhances user experience and helps operators maintain optimal performance.

In terms of comfort, the GT 3200 comes with an ergonomic seat and intuitive controls, ensuring that operators can work for extended periods without discomfort. The high-back seat provides excellent support, and the easy-to-reach controls simplify operation, making mowing and gardening tasks less strenuous.

In summary, the Cub Cadet GT 3200 is a versatile, powerful, and technologically advanced garden tractor that offers a wide range of features designed to enhance performance and user experience. Whether for comprehensive lawn care or diverse landscaping tasks, the GT 3200 stands out as a top choice for those seeking quality and reliability in outdoor equipment.
Top Page Image Contents