ETA Systems ETA C15D specifications KEY Features, Applications, Front Panel Features

Page 6

ETA-C15D

Power Conditioner

KEY FEATURES

10 Total Outlets Are Provided

8 Rear Panel Outlets

2 Front Panel and 1 Rear Panel Unswitched Convenience Outlets

RFI Noise Filtering to Reduce Radio Frequency Interference

EMI To Reduce Electromagnetic Interference

Dual Clamping Spike & Surge Suppression, DCS Circuitry

Front Panel Digital AC Mains Voltmeter

LED Indication of Reversed “Live” and “Neutral” Wiring

Abnormal AC Line Voltage Indicator for Voltages Between 101V–107V or 128V–132V

Extreme Voltage Shutdown (EVS) Below 101V or Above 132V AC Line

Circuit Breaker Protection @ 15A Indicated by “Breaker Open” Indicator

Front Mounted Pull-out LED Light With 2-Position Dimmer

Rear Mounted XLR Connector for 12VDC LED Lamp

APPLICATIONS

The ETA-C15D was designed to be flexible with features that allow it to be used in a variety of applications. The ETA-C15D can be used solely for protection against lightning strikes or voltage surges or for AC Mains Voltage Monitoring. If fuzzy video or frequent static pops occur, the AC power conditioning will eliminate or reduce those inconveniences. The following are just a few examples of applications the ETA-C15D can be used:

Restaurants

Houses of Worship

Schools

Home Theaters

Office Buildings

Sports Bars

FRONT PANEL FEATURES

1

2

3

4

5

1.Unswitched AC Outlet – The two 120VAC outlets are always live when the ETA-C15D power cord is plugged into an AC mains power source and voltage is present. Note: The AC mains power switch does not affect the Unswitched AC Outlets. The Unswitched Outlets are protected by the surge protection circuitry, but will not be shut off by the EVS circuit.

2.AC Mains Breaker – The 15A rated breaker will open if the combined draw of all AC outlets exceeds 15A. Note: The breaker is designed to exceed its rating for a short period of time. If the breaker is tripped, you must first remove the load from the ETA-C15D and then push to reset.

3.Power Switch – To turn the ETA-C15D on or off, press the switch to the ON or OFF position.

4.Pull Out Light – The LED light is designed to be pulled out when needed.

5.Pull Out Light Dimmer Switch – Use this control for the Pull Out Light. Settings include an “Off” position and two brightness settings, Low and High, when “On.”

1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.

Telephone: 800-321-6699 • Fax: 800-996-3821

– 6 –

ETAsys.com

Specifications are subject to change without notice.

Image 6
Contents ETA-C15D Table of Contents Important Safety Instructions ETA-C15D Introduction KEY Features Front Panel FeaturesApplications 10 11 Rear Panel Features InstallationAC Power Cord Retainer System Troubleshooting Guide To reset the ETA-C15D by restarting the start up sequenceETA-C15D Specifications Technical DataLimited Warranty Service

ETA C15D specifications

The ETA Systems ETA C15D is a cutting-edge power management solution designed for both residential and commercial applications. Its primary objective is to provide efficient energy use while ensuring system reliability and flexibility. This compact unit integrates advanced technologies to manage energy distribution intelligently and sustainably.

One of the standout features of the ETA C15D is its ability to monitor and control energy consumption in real time. The system employs a sophisticated energy management software that allows users to track energy usage patterns, identify peak consumption times, and receive alerts for unusual energy spikes. This capability not only aids in reducing overall energy costs but also contributes to lowering the carbon footprint of the property.

The ETA C15D incorporates smart grid technology, making it capable of communicating with other energy systems. This integration is crucial for optimizing energy flow from renewable sources, such as solar panels and wind turbines. By leveraging smart grid features, the ETA C15D can balance energy loads efficiently, ensuring sustainability and maximizing the use of clean energy sources.

Additionally, the ETA C15D features multiple power output options, catering to various appliances and electronic devices. Users can manage different devices on separate circuits, providing precise control over energy distribution. This flexibility is particularly beneficial in commercial setups where energy demand may fluctuate significantly throughout the day.

Security is another important aspect of the ETA C15D. The system includes built-in protection features that safeguard against surges, overloads, and short circuits. This protective technology ensures the longevity of connected devices and enhances overall system reliability.

User experience is also prioritized in the design of the ETA C15D. Its interface is user-friendly and accessible, allowing for easy installation and configuration. The accompanying mobile application enables users to monitor their energy consumption remotely, providing insights and controls at their fingertips.

In summary, the ETA Systems ETA C15D stands out as a versatile and intelligent energy management solution. With its innovative technologies, user-centric design, and commitment to sustainability, it represents a significant step forward in modern power management systems. Whether for a home or business, the ETA C15D offers the features necessary to optimize energy use effectively while promoting an eco-friendly approach.