Rear Panel Features, Installation | ETA Systems ETA C15D specs

ETA-C15D

Power Conditioner

REAR PANEL FEATURES

1.AC Mains Input – Connect the 9' (3m) power cord to a 15A 120VAC outlet to provide power to the ETA-C15D.

2.AC Filtered Outlets – The five AC outlets are “Live” when the power switch is activated. These outlets are recommended for products such as Computers, Modems, Routers, DSP Processors, Cable/SAT, DVD, or CRT TVs. These outlets have a special filter circuit that is optimized to reduce interference to your Digital and Analog components. The total maximum draw for this section is 10A and the total current draw for the ETA-C15D is 15A.

3.AC High Power Outlet – This outlet is designed to deliver maximum current to power hungry components like amplifiers and projectors. It does not harm low power consuming components when connected to this outlet.

4.Unswitched AC Outlet – This 120VAC outlet is always live when the ETA-C15D power cord is plugged into an AC mains power source and voltage is present. If voltage is present at the outlets it will be displayed on the AC Mains Meter. Note: The AC mains power switch does not affect the Unswitched AC Outlets. The Unswitched Outlets are protected by the surge protection circuitry but will not be shut off by the EVS circuit.

5.XLR Light Socket – A 12VDC XLR light socket provides power for the optional AL-GNL18 light.

6.Light Socket Power Switch – This switch turns the XLR light socket On / Off.

Installation

Before installing we strongly suggest you read the entire manual to ensure you benefit from all the features of the ETA-C15D. The ETA-C15D can be placed on a shelf or rack mounted in a standard 19" width rack. When mounting to a rack rail system use 10⁄32" x 1". Placement within a rack is not critical but the rack should be within 6' of a dedicated 15A AC outlet. Always make sure the 15A outlet is properly inspected by a certified electrician prior to connecting the ETA-C15D. Below are a few installation tips.

•After plugging the ETA-C15D into a 15A AC Mains outlet inspect the Wiring Fault LED for illumination. The LED should not be on.

•Inspect the equipment that is to be plugged into the ETA-C15D to ensure it does not exceed 15A total amperage draw.

•Divide the equipment into two categories. Pick the outlets that match the outlets equipment use.

1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.

Telephone: 800-321-6699 • Fax: 800-996-3821

– 8 –

ETAsys.com

Specifications are subject to change without notice.

ETA C15D specifications

The ETA Systems ETA C15D is a cutting-edge power management solution designed for both residential and commercial applications. Its primary objective is to provide efficient energy use while ensuring system reliability and flexibility. This compact unit integrates advanced technologies to manage energy distribution intelligently and sustainably.

One of the standout features of the ETA C15D is its ability to monitor and control energy consumption in real time. The system employs a sophisticated energy management software that allows users to track energy usage patterns, identify peak consumption times, and receive alerts for unusual energy spikes. This capability not only aids in reducing overall energy costs but also contributes to lowering the carbon footprint of the property.

The ETA C15D incorporates smart grid technology, making it capable of communicating with other energy systems. This integration is crucial for optimizing energy flow from renewable sources, such as solar panels and wind turbines. By leveraging smart grid features, the ETA C15D can balance energy loads efficiently, ensuring sustainability and maximizing the use of clean energy sources.

Additionally, the ETA C15D features multiple power output options, catering to various appliances and electronic devices. Users can manage different devices on separate circuits, providing precise control over energy distribution. This flexibility is particularly beneficial in commercial setups where energy demand may fluctuate significantly throughout the day.

Security is another important aspect of the ETA C15D. The system includes built-in protection features that safeguard against surges, overloads, and short circuits. This protective technology ensures the longevity of connected devices and enhances overall system reliability.

User experience is also prioritized in the design of the ETA C15D. Its interface is user-friendly and accessible, allowing for easy installation and configuration. The accompanying mobile application enables users to monitor their energy consumption remotely, providing insights and controls at their fingertips.

In summary, the ETA Systems ETA C15D stands out as a versatile and intelligent energy management solution. With its innovative technologies, user-centric design, and commitment to sustainability, it represents a significant step forward in modern power management systems. Whether for a home or business, the ETA C15D offers the features necessary to optimize energy use effectively while promoting an eco-friendly approach.