Agilent Technologies 6800 manual Timing Diagram for Application #5

Page 25

Agilent 6800 series setup

•Connect the ac source output to the ac input of the equipment under test.

•Use the computer to develop a 1024 point array representing a cycle of voltage amplitude data.

•Use the TRACe:DEFine command to name the waveform CLASS 1 and allocate non-volatile storage space.

•Use the TRACe:DATa command to send the 1024 point array to the ac power source/analyzer.

•Set the Shape to List mode.

•Set the List points as follows:

List Point	Shape	Dwell Time

1	Sine	120 s

2	CLASS1	120 s

3	Sine	120 s

•Set the List to sequence automatically.

•Set the transient trigger source to BUS.

•Initiate the transient trigger.

•Enable the output.

•Send a Bus trigger.

Upon receipt of the trigger, the first List step is executed and the output is set to a 120 Vrms, 60 Hz sinewave. After 120 seconds, the ac power source/ analyzer automatically executes the second List step. The output will remain at the CLASS 1 test level for 120 seconds and then will execute the third List step. After the entire List is executed, the output of the ac power source/analyzer will return to the Fixed mode levels.

Timing Diagram for Application #5	25

Image 25

Contents Product Note Agilent 6800 Series AC Power Source/AnalyzerIntroduction Table of ContentsIntroduction to the Agilent 6800 AC Power Source/Analyzer What is a Pulse Transient? What is a Step Transient?What is a List Transient? Agilent 6800 Series Output TransientsModel of the Transient System What Can Serve as the Source of the Trigger? What Actions Can be Triggered?How Can Triggers be Generated? Output Transient Trigger Model Measurement Trigger Model What is a FETCh Command? What is a MEASure Command?Agilent 6800 Series Measurements MEASure and FETCh Command Execution Diagram Application Transient Generation ApplicationsAdvantages/benefits of the Agilent 6800 series solution Agilent 6800 series features usedApplication Simulating AC Line Sub-Cycle Dropouts Overview of applicationTiming Diagram of Application Page At 400 Hz Application Generating MIL-STD-704D WaveformsSet the List points as follows List Timing Diagram for Application Page Advantages/benefits of the Agilent 6800 series Application Performing IEC 555-2 MeasurementsUsing the computer Page Application Performing Inrush Current Measurements Agilent 6800 series setup Page How the 6800 series implements user-defined waveforms Application Generating User-Defined WaveformsTiming Diagram for Application #5 Page Page Advantages/benefits of the Agilent 6812A and 6813A solutions Agilent 6812A and 6813A features usedPage Our Promise