Technical
Specifications
|
| 13 HP / OHV | |
Engine Type |
| Recoil Start | |
| Air Cooled | ||
|
| ||
|
| 3600 RPM | |
Displacement |
| 390cc | |
Rotation viewed from PTO | Counterclockwise | ||
(power takeoff - the output | |||
(Facing the Shaft) | |||
shaft) |
| ||
|
| ||
Fuel | Type | 89+ octane unleaded gasoline | |
Capacity | 1.7 Gallons | ||
| |||
Engine | Type | SAE 25W (above 32° F) | |
SAE | |||
Oil |
| ||
Capacity | 37.2 Ounces (1.1L) | ||
| |||
Spark Plug | Types | LG F7RTC | |
Gap | 0.027” to 0.031” | ||
| |||
Engine | California Emissions | ||
Approvals | U.S. EPA Phase II | ||
Pump RPM | 3400 RPM |
| |
Water Flow | 4.0 Gal. Per Minute | ||
Pressure | 4,000 PSI |
| |
Rating |
| ||
|
| ||
Pump Inlet | 30 PSI/4 Gal. Per Minute (Minimum) | ||
Pressure | 80 PSI (Maximum) | ||
Hose | 5/16” I.D. |
| |
Required |
| ||
|
| ||
| Type | SAE 25W (above 32° F) | |
Pump Oil | SAE | ||
| |||
| Capacity | 15.2 Ounces (0.45L) | |
Water Temperature | Up to 104° F / 40°C | ||
|
| 0° (Red) | |
Nozzles Included | 15° (Yellow) | ||
40° (white) | |||
|
| ||
|
| Chemical (Black) | |
Spray Gun Type | Safety | ||
Handle | |||
|
| ||
Hose Length |
| 32 Ft. | |
Hose Fittings |
| Quick Connect | |
Hose Pressure |
| 6000 PSI Maximum | |
Wheel Size & Inflation | 4.10/3.50 Pneumatic | ||
30 PSI (Cold) | |||
|
| ||
Servicing
WARNING Risk of serious personal injury
from accidental starting. Turn the Power Switch of the equipment to its “OFF” position, wait for the engine to cool, and unplug the spark plug wire(s) before performing any inspection, maintenance, or cleaning procedures.
Damaged equipment can fail, causing serious personal injury. Do not use damaged equipment. If abnormal noise, vibration, or excess smoking occurs, have the problem corrected before further use.
Maintenance Procedures
Many maintenance procedures, including any not detailed
in this manual, will need to be performed by a qualified technician for safety. If you have any doubts about your ability to safely service the equipment or engine, have a qualified technician service the equipment instead.
Engine Oil Change
CAUTION! Oil is very hot during operation and can cause burns. Wait for engine to cool before changing oil.
1.Place a drain pan (not included) underneath the Crankcase’s Drain Plug (14). (See Figure K, next page.)
REV 09b
SKU 97005 | For technical questions, please call | Page 15 |