Unpacking
When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at
Set Up Instructions
Read the entire Important Safety Information section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
WARNING Risk of accidental starting; resulting
in serious personal injury. Turn the Power Switch of the equipment to its “OFF” position, wait for the engine to cool, and unplug the spark plug wire(s) before assembling or making any adjustments to the equipment.
Note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual.
Assembly
1.This equipment may not have a spark arresting muffler included. A spark arresting muffler is required by law in California, on some US Forest Service land, and possibly in other areas or situations. Install an approved spark arrestor before use if legally required or if engine is to be used near grass, brush, forests, crops, or any other flammable materials.
HANDLE (10)
FIGURE A
BOLTS/NUTS
(11, 12)
FRAME (2)
2.To attach the Handle (10) to the Frame (2), insert the lower portion of the Handle into the Frame. Then secure the Handle to the Frame, using two Bolts and two Nuts.
(See Figure A.)
LOCK NUT (13)
WHEEL (1) | FIGURE B |
3.To attach the Wheels (1), slide a Wheel onto each end of the Axle located at the front of the Frame (2). Make sure air valve on wheel faces outward. Then secure the Wheels to the Axle, using one Lock Nut (13) for each Wheel. (See Figure B.)
SKU 97005 | For technical questions, please call | Page 8 |