5.Maintain labels and nameplates on the equipment. These carry impor- tant information. If unreadable or missing, contact Harbor Freight Tools for a replacement.
6.Have the equipment serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the equip- ment is maintained. Do not attempt any service or maintenance proce- dures not explained in this manual or any procedures that you are un- certain about your ability to perform safely or correctly.
7.Store equipment out of the reach of children.
8.Follow scheduled engine and equip- ment maintenance.
Refueling:
1.Do not smoke, or allow sparks, flames, or other sources of ignition around the equipment, especially when refuelling.
2.Do not refill the fuel tank while the engine is running or hot.
3.Do not fill fuel tank to the top. Leave a little room for the fuel to expand as needed.
4.Refuel in a
Save these instructions.
Basic Specifications
Fuel | Type | 89+ octane unleaded gasoline | |
|
| ||
Capacity | 1.7 Gallons | ||
| |||
|
|
| |
Engine | Type | SAE 25W (above 32° F) | |
SAE | |||
| |||
Oil |
|
| |
Capacity | 37.2 Ounces (1.1L) | ||
| |||
|
|
| |
| Type | SAE 25W (above 32° F) | |
Pump Oil | SAE | ||
| |||
| Capacity | 15.2 Ounces (0.45L) | |
|
|
|
Note: Additional specifications found in the Technical Engine Specifications chart in this manual.
The emission control system for this engine is warranted for standards set by the U.S. Environmental Protection Agency and by the California Air Resources Board (also known as
At high altitudes, the engine’s carburetor, governor, and any other parts that control the
REV 09b
SKU 97005 | For technical questions, please call | Page 7 |