equipment for a purpose for which it is not intended.
22.Never operate the Pressure Washer using a pulsing action. Pulsing is the repeated and rapid ON and OFF operation of the Trigger. This action could result in the failure of components and connections that are under pressure.
23.This is a clean, cold water Pressure Washer. The working temperature range must be between 41° Fahrenheit and 104° Fahrenheit. The water supply pressure must not exceed 58 PSI and must be clean and free of any abrasive particles or corrosive contaminates.
24.Do not direct the water jet at live electrical equipment or the Pressure Washer itself.
25.Do not direct the water jet at yourself, others or pets.
26.Do not use the Pressure Washer to pump gasoline, kerosene, or any other flammable or corrosive liquids.
27.Do not leave the Pressure Washer unattended while the machine is running.
28.Never allow the Pressure Washer to run for more than two minutes with the Spray Gun in its closed position.
29.Do not allow the Pressure Washer to run dry, as this will cause serious damage to the Seals and Pump.
30.WARNING: The brass components of this product contain lead, a chemical know to the State of California to cause birth defects (or other reproductive harm). California
Health & Safety Code 25249.5, et seq.
31.Always ensure all water pressure is released and the Pressure Washer is turned off before attempting to disconnect any Hoses or Connectors.
32.This Pressure Washer is rated for domestic use only and should not be used for professional or commercial purposes.
33.Use caution when cleaning a vehicle to prevent damaging the finish with a high pressure water stream.
Service precautions
1.Before service, maintenance, or cleaning:
a.Turn the engine switch to its “OFF” position.
b.Allow the engine to completely cool.
c.Then, remove the spark plug wire(s) from the spark plug(s).
2.Keep all safety guards in place and in proper working order. Safety guards include muffler, air cleaner, mechani- cal guards, and heat shields, among other guards.
3.Do not alter or adjust any part of the equipment or its engine that is sealed by the manufacturer or dis- tributor. Only a qualified service technician may adjust parts that may increase or decrease gov- erned engine speed.
4.Wear
SKU 97005 | For technical questions, please call | Page 6 |