Harbor Freight Tools 99741 manual 3a. For a vertical or sloped surface, 3b. For a flat surface

Page 15

noted from the detergent, do not use it when cleaning.

2.First, pass over the area with a light cleaning, and then more thoroughly clean it.

3a. For a vertical or sloped surface:

a. Wash from the top down.

b. If possible, direct the stream in the same direction as the slope towards a draining area. This will enable better drainage and therefore better cleaning.

3b. For a flat surface:

a. If a thin layer of water accumulates on the surface, periodically use the stream to direct this water towards the drainage.

b. After the major cleaning is done, sweep the surface with the stream to help direct loose debris toward the drainage.

4.If detergent is to be applied: Only use pressure washing detergent; oth- er detergents will clog or damage the pressure washer. Apply the deter- gent at low pressure, by using the low pressure setting of the Spray Wand. Allow the detergent several minutes to sit and soak into the work surface; this will improve cleaning efficiency. Briefly shut off the unit and turn the

Pressure Control Sleeve counter- clockwise to switch to high pressure

mode and automatically shut off the soap dispenser for rinsing. Rinse off all detergent completely.

5.Hold the Water Gun at about a 45° angle and steadily sweep the stream back and forth; if a severe, head-on angle is used, dirt may imbed in the surface being cleaned. Follow a steady, consistent pace during clean- ing; this will help prevent stripes or discoloration afterwards. If streaking or uneven cleaning is noted at the end of a project, go over the edges of the streaks with a wide fan pattern to help blend these lighter areas in.

6.If several different surfaces are to be cleaned, be careful not to damage any of the less solid surfaces while trying to clean the harder ones. This is especially a concern when cleaning tile and grout, bricks and mortar, or stones and mortar.

7.If wood is being cleaned, be careful not to damage it. Wood will usually require resurfacing (Sanding) and re- coat with a surface protectant (wood, stain, varnish) after it has dried. Try to avoid leaving water on a wooden surface; doing so can harm the sur- face.

SKU 99741

For technical questions, please call 1-800-444-3353;

PAGE 15

Troubleshooting section at end of manual.

 

 

Page 14 Page 16
Image 15
Page 14 Page 16
Contents 1600 PSI For technical questions or replacement parts, please callContents General Pressure Washer Safety Electrical safetySave This Manual Gfci Precautions Specific Pressure Washer Safety ServicePressure washer use and care Page Vibration Safety Grounding SymbologySpecifications AssemblyUnpacking Controls and features Controls And SetupSetup Failure to follow this step can dam- age the Pump OperationPage Use Proper Pressure Washer Operation Techniques Cleaning RecommendationsOperating Tips Become Familiar With your Machine3b. For a flat surface 3a. For a vertical or sloped surfaceFurther use. Do not use damaged equipment Inspection, Maintenance CleaningLimited 1 year / 90 Day warranty Parts List Part Description QtyRecord Product’s Serial Number Here Assembly Diagram Electrician TroubleshootingWater leaking from within the housing Pressure Washer Stops SuddenlyPressure washer does not build pressure Pressure Washer will not startDetergent will not dispense Pressure changes during useREV 08h

99741 specifications

Harbor Freight Tools is well-known for providing high-quality tools at accessible prices, and one of its standout products is the 99741. This tool is commonly recognized for its efficiency and versatility, making it popular among both DIY enthusiasts and professional tradespeople alike.

The Harbor Freight Tools 99741 is a powerful, reliable tool designed for a wide range of applications. It features a robust motor, capable of delivering impressive torque and consistent performance across different tasks. This allows users to tackle tougher jobs without worrying about overheating or excessive wear.

One of the standout characteristics of the 99741 is its ergonomic design. The tool is lightweight and equipped with a comfortable grip, which minimizes fatigue during extended use. This aspect is particularly appreciated by users who rely on this tool for lengthy projects, as it allows for better handling and more precision in operation.

The 99741 also boasts a variety of features that enhance its usability. It typically comes with adjustable settings, enabling users to customize the tool's performance based on their specific needs. Whether you're drilling, driving screws, or working with other materials, these adjustments make it a versatile addition to any toolbox.

In terms of technology, Harbor Freight Tools has integrated advanced safety features into the 99741. These features help to protect users from common accidents associated with power tools, ensuring that safety is prioritized during operation. Additionally, the tool is designed for easy maintenance, meaning users can keep it in peak condition without extensive downtime.

Another significant characteristic of the 99741 is its affordability. Harbor Freight Tools offers this high-quality product at a price point that is accessible to a wide range of customers. This combination of quality and cost-effectiveness has solidified the 99741 as a staple in many workshops.

Overall, the Harbor Freight Tools 99741 is an excellent tool that embodies performance, safety, and value. Its durable construction, ergonomic design, and versatile features make it a reliable option for anyone in need of a dependable tool for various projects. Whether you're a seasoned professional or a weekend warrior, the 99741 is designed to meet your expectations and enhance your productivity.
Top Page Image Contents