Harbor Freight Tools 99741 manual Inspection, Maintenance Cleaning

Page 16

Inspection, Maintenance,

And Cleaning

Procedures not specifically explained in this manual must be performed only by a qualified technician.

To prevent serious injury

from accidental operation:

Before performing any inspection, maintenance, or cleaning procedures:

a. Turn the Power Switch of the equipment to its “OFF” position.

b. Unplug the equipment from its electrical outlet.

c. Shut off water supply.

d. Safely discharge all residual water pressure.

e. Disconnect water supply hose.

To prevent serious injury from pressure Washer failure:

Do not use damaged equipment. If abnormal noise or vibration occurs, have the problem corrected before further use.

1.Before each use, inspect the general condition of the Pressure Washer. Check for loose screws, misalign- ment or binding of moving parts, damaged electrical wiring, damaged High Pressure Hose, damaged ac- cessories, and any other condition that may affect its safe operation. If abnormal noise or vibration occurs, have the problem corrected before

further use. Do not use damaged equipment.

2.To clean, remove excess water from the Pump by tipping the unit to drain any remaining water from the inlet and outlet fittings. Drain the Deter- gent Dispenser and flush with run- ning water. Use only a clean cloth and mild detergent to clean the body of the Pressure Washer. Do not use solvents.

Do not immerse any part of the tool in liquid. Dry off any remaining water on all parts and fittings.

Remove mineral deposits from the nozzle using a thin, stiff wire. The more minerals that are dissolved in the water (the harder the water) you use, the more often mineral buildup will need to be cleaned out from in- side nozzle.

3.STORAGE: When storing, empty the Pressure Washer of water. Frost will damage the Pressure Washer

if the unit contains water. Store the Pressure Washer in a dry, frost-free room. Flush the unit with automotive antifreeze prior to long-term storage. Dispose of antifreeze according to local ordinances.

4.WARNING! If the supply cord or plug of this pressure washer is damaged, it must be replaced only by a qualified service technician.

SKU 99741

For technical questions, please call 1-800-444-3353;

PAGE 16

Troubleshooting section at end of manual.

 

 

Page 15 Page 17
Image 16
Page 15 Page 17
Contents For technical questions or replacement parts, please call 1600 PSIContents Electrical safety General Pressure Washer SafetySave This Manual Gfci Precautions Service Specific Pressure Washer SafetyPressure washer use and care Page Vibration Safety Symbology GroundingAssembly SpecificationsUnpacking Controls And Setup Controls and featuresSetup Operation Failure to follow this step can dam- age the PumpPage Cleaning Recommendations Operating TipsBecome Familiar With your Machine Use Proper Pressure Washer Operation Techniques3a. For a vertical or sloped surface 3b. For a flat surfaceInspection, Maintenance Cleaning Further use. Do not use damaged equipmentLimited 1 year / 90 Day warranty Part Description Qty Parts ListRecord Product’s Serial Number Here Assembly Diagram Troubleshooting Water leaking from within the housingPressure Washer Stops Suddenly ElectricianPressure Washer will not start Pressure washer does not build pressurePressure changes during use Detergent will not dispenseREV 08h

99741 specifications

Harbor Freight Tools is well-known for providing high-quality tools at accessible prices, and one of its standout products is the 99741. This tool is commonly recognized for its efficiency and versatility, making it popular among both DIY enthusiasts and professional tradespeople alike.

The Harbor Freight Tools 99741 is a powerful, reliable tool designed for a wide range of applications. It features a robust motor, capable of delivering impressive torque and consistent performance across different tasks. This allows users to tackle tougher jobs without worrying about overheating or excessive wear.

One of the standout characteristics of the 99741 is its ergonomic design. The tool is lightweight and equipped with a comfortable grip, which minimizes fatigue during extended use. This aspect is particularly appreciated by users who rely on this tool for lengthy projects, as it allows for better handling and more precision in operation.

The 99741 also boasts a variety of features that enhance its usability. It typically comes with adjustable settings, enabling users to customize the tool's performance based on their specific needs. Whether you're drilling, driving screws, or working with other materials, these adjustments make it a versatile addition to any toolbox.

In terms of technology, Harbor Freight Tools has integrated advanced safety features into the 99741. These features help to protect users from common accidents associated with power tools, ensuring that safety is prioritized during operation. Additionally, the tool is designed for easy maintenance, meaning users can keep it in peak condition without extensive downtime.

Another significant characteristic of the 99741 is its affordability. Harbor Freight Tools offers this high-quality product at a price point that is accessible to a wide range of customers. This combination of quality and cost-effectiveness has solidified the 99741 as a staple in many workshops.

Overall, the Harbor Freight Tools 99741 is an excellent tool that embodies performance, safety, and value. Its durable construction, ergonomic design, and versatile features make it a reliable option for anyone in need of a dependable tool for various projects. Whether you're a seasoned professional or a weekend warrior, the 99741 is designed to meet your expectations and enhance your productivity.
Top Page Image Contents