Harbor Freight Tools 99741 manual Specifications, Unpacking, Assembly

Page 9

Specifications

Electrical Requirements

120 V / 60 Hz / 13 A

35 Ft. Long Power Cord

Water Pressure

1,600 PSI

Flow Rate

1.6 GPM

Water Supply Required

3-4 GPM minimum

Hose Length

19 Ft.

Unpacking

When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.

Assembly

Read the entire Important Safety Information section at the beginning of this manual including all text under subheadings therein before set up or use of this product.

To prevent serious injury

from accidental operation:

Before performing any inspection, maintenance, or cleaning procedures:

a. Turn the Power Switch of the equipment to its “OFF” position.

b. Unplug the equipment from its electrical outlet.

c. Shut off water supply.

d. Safely discharge all residual water pressure.

e. Disconnect water supply hose.

Note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual.

1.Check the Inlet Strainer for any block- age, including packaging debris. The Pressure Washer may be shipped with a plastic plug in the Inlet.

2.Position the rear of the Handle above the rear of the Pressure Washer body. Connect the Suction Tube from the top of the Pressure Washer body to the connector on the bottom of the Detergent Bottle in the Handle. Make sure that the Suction tube does not bend or get pinched during assembly. Lower the Handle onto the Pres- sure Washer Body. Then secure the Handle to the Pressure Washer body, using the Screws provided.

3.Insert the Spray Wand into the Wa- ter Gun, and twist the Wand into the Extension until the Wand locks in place. Pull the Wand to make certain it is secure.

4.Attach the High Pressure Hose to the Outlet Port on the front of the Pres- sure Washer.

5.Attach the female part of the Quick Connector Set to the Supply Port on the back of the Pressure Washer. At- tach the male part of the Quick Con- nector Set to a heavy-duty garden hose (not included). Then, pull back on the collar on the Female quick connector and insert the male Quick Connector.

SKU 99741

For technical questions, please call 1-800-444-3353;

PAGE 9

Troubleshooting section at end of manual.

 

 

Page 8 Page 10
Image 9
Page 8 Page 10
Contents 1600 PSI For technical questions or replacement parts, please callContents General Pressure Washer Safety Electrical safetySave This Manual Gfci Precautions Specific Pressure Washer Safety ServicePressure washer use and care Page Vibration Safety Grounding SymbologySpecifications AssemblyUnpacking Controls and features Controls And SetupSetup Failure to follow this step can dam- age the Pump OperationPage Operating Tips Cleaning RecommendationsBecome Familiar With your Machine Use Proper Pressure Washer Operation Techniques3b. For a flat surface 3a. For a vertical or sloped surfaceFurther use. Do not use damaged equipment Inspection, Maintenance CleaningLimited 1 year / 90 Day warranty Parts List Part Description QtyRecord Product’s Serial Number Here Assembly Diagram Water leaking from within the housing TroubleshootingPressure Washer Stops Suddenly ElectricianPressure washer does not build pressure Pressure Washer will not startDetergent will not dispense Pressure changes during useREV 08h

99741 specifications

Harbor Freight Tools is well-known for providing high-quality tools at accessible prices, and one of its standout products is the 99741. This tool is commonly recognized for its efficiency and versatility, making it popular among both DIY enthusiasts and professional tradespeople alike.

The Harbor Freight Tools 99741 is a powerful, reliable tool designed for a wide range of applications. It features a robust motor, capable of delivering impressive torque and consistent performance across different tasks. This allows users to tackle tougher jobs without worrying about overheating or excessive wear.

One of the standout characteristics of the 99741 is its ergonomic design. The tool is lightweight and equipped with a comfortable grip, which minimizes fatigue during extended use. This aspect is particularly appreciated by users who rely on this tool for lengthy projects, as it allows for better handling and more precision in operation.

The 99741 also boasts a variety of features that enhance its usability. It typically comes with adjustable settings, enabling users to customize the tool's performance based on their specific needs. Whether you're drilling, driving screws, or working with other materials, these adjustments make it a versatile addition to any toolbox.

In terms of technology, Harbor Freight Tools has integrated advanced safety features into the 99741. These features help to protect users from common accidents associated with power tools, ensuring that safety is prioritized during operation. Additionally, the tool is designed for easy maintenance, meaning users can keep it in peak condition without extensive downtime.

Another significant characteristic of the 99741 is its affordability. Harbor Freight Tools offers this high-quality product at a price point that is accessible to a wide range of customers. This combination of quality and cost-effectiveness has solidified the 99741 as a staple in many workshops.

Overall, the Harbor Freight Tools 99741 is an excellent tool that embodies performance, safety, and value. Its durable construction, ergonomic design, and versatile features make it a reliable option for anyone in need of a dependable tool for various projects. Whether you're a seasoned professional or a weekend warrior, the 99741 is designed to meet your expectations and enhance your productivity.
Top Page Image Contents