Harbor Freight Tools 99741 manual

Page 6

Plug in a dry location and as far away as possible from the object being sprayed. Keep all electrical connec- tions dry and off the ground.

7.When using the Pressure Washer, al- ways maintain a firm grip on the Wa- ter Gun with both hands. Squeezing the Trigger of the Water Gun causes a kickback force.

8.Do not pull or carry the Power Wash- er by its Power Cord, or pull the Cord around sharp corners or edges. Do not unplug the Power Washer by pull- ing on the Cord. Keep the Cord away from heated surfaces.

9.Do not handle the GFCI Plug with wet hands.

10.Avoid unintentional starting. Make sure you are prepared to begin work before turning on the Pressure Wash- er.

11.The work area should have adequate drainage to reduce the possibility of a fall due to slippery surfaces.

12.This Pressure Washer is intended for outdoor residential use only.

13.Some chemicals or detergents may be harmful if inhaled or ingested. Use an ANSI approved respirator or mask whenever there is a chance that vapors may be inhaled.

14.Keep the High Pressure Hose con- nected to the Pressure Washer and Spray Gun while the system is pres- surized. Disconnecting the Pressure Hose while the unit is pressurized is dangerous, and may cause injury.

15.Prior to starting the Pressure Washer in cold weather, check all of the parts

of the unit to make sure ice has not formed. Do not store the unit any- where that the temperature will fall below 32° F (0° C). (See “Inspection, Maintenance, and Cleaning” section for proper storage procedures.)

16.Do not feed already-pressurized wa- ter (Such as that from another pres- sure washer) into this washer.

17.When dispensing detergent, apply the detergent to the cleaning area at low pressure only. Then, spray the detergent off the cleaning area by us- ing the adjustable Nozzle. NOTICE: Detergent dispensing only works when the spray wand is in the low- pressure position.

18.The high pressure water flow can damage the work surface if not used properly. Always test the spray in an open area first.

19.Never move the Pressure Washer by pulling on the High Pressure Hose. Use the Handle provided on the top of the unit.

20.Never leave the Pressure Washer unattended when it is plugged into an electrical outlet. Turn off the Pres- sure Washer, and unplug it from its electrical outlet before leaving.

21.If water is leaking out of the Pressure Washer immediately shut off the unit. Unplug the Pressure Washer, and discharge all pressure before tighten- ing fittings or having repair work done by a qualified technician.

22.People with pacemakers should consult their physician(s) before use.

Electromagnetic fields in close prox- imity to heart pacemaker could cause

SKU 99741

For technical questions, please call 1-800-444-3353;

PAGE 6

Troubleshooting section at end of manual.

 

 

Page 5 Page 7
Image 6
Page 5 Page 7
Contents For technical questions or replacement parts, please call 1600 PSIContents General Pressure Washer Safety Electrical safetySave This Manual Gfci Precautions Specific Pressure Washer Safety ServicePressure washer use and care Page Vibration Safety Symbology GroundingSpecifications AssemblyUnpacking Controls And Setup Controls and featuresSetup Operation Failure to follow this step can dam- age the PumpPage Become Familiar With your Machine Cleaning RecommendationsOperating Tips Use Proper Pressure Washer Operation Techniques3a. For a vertical or sloped surface 3b. For a flat surfaceInspection, Maintenance Cleaning Further use. Do not use damaged equipmentLimited 1 year / 90 Day warranty Parts List Part Description QtyRecord Product’s Serial Number Here Assembly Diagram Pressure Washer Stops Suddenly TroubleshootingWater leaking from within the housing ElectricianPressure Washer will not start Pressure washer does not build pressurePressure changes during use Detergent will not dispenseREV 08h

99741 specifications

Harbor Freight Tools is well-known for providing high-quality tools at accessible prices, and one of its standout products is the 99741. This tool is commonly recognized for its efficiency and versatility, making it popular among both DIY enthusiasts and professional tradespeople alike.

The Harbor Freight Tools 99741 is a powerful, reliable tool designed for a wide range of applications. It features a robust motor, capable of delivering impressive torque and consistent performance across different tasks. This allows users to tackle tougher jobs without worrying about overheating or excessive wear.

One of the standout characteristics of the 99741 is its ergonomic design. The tool is lightweight and equipped with a comfortable grip, which minimizes fatigue during extended use. This aspect is particularly appreciated by users who rely on this tool for lengthy projects, as it allows for better handling and more precision in operation.

The 99741 also boasts a variety of features that enhance its usability. It typically comes with adjustable settings, enabling users to customize the tool's performance based on their specific needs. Whether you're drilling, driving screws, or working with other materials, these adjustments make it a versatile addition to any toolbox.

In terms of technology, Harbor Freight Tools has integrated advanced safety features into the 99741. These features help to protect users from common accidents associated with power tools, ensuring that safety is prioritized during operation. Additionally, the tool is designed for easy maintenance, meaning users can keep it in peak condition without extensive downtime.

Another significant characteristic of the 99741 is its affordability. Harbor Freight Tools offers this high-quality product at a price point that is accessible to a wide range of customers. This combination of quality and cost-effectiveness has solidified the 99741 as a staple in many workshops.

Overall, the Harbor Freight Tools 99741 is an excellent tool that embodies performance, safety, and value. Its durable construction, ergonomic design, and versatile features make it a reliable option for anyone in need of a dependable tool for various projects. Whether you're a seasoned professional or a weekend warrior, the 99741 is designed to meet your expectations and enhance your productivity.
Top Page Image Contents