Husqvarna 6027PW, 9032PW, 1340PW Detergent Application, Distance from Cleaning Surface, Detergents

Page 14

OPERATION

Spray water against a surface at a 45 degree angle to achieve the most beneficial impact force and to efficiently remove debris.

DISTANCE FROM CLEANING SURFACE

The distance between the spray nozzle and the cleaning surface is another factor that affects the impact force of the water. The impact force of the water increases as the nozzle is moved closer to the surface.

Figure 14 - Optimum angle to cleaning surface

HOW TO AVOID DAMAGING SURFACES

Damage to cleaning surfaces occurs because the impact force of the water exceeds the durability of the surface. You can vary the impact force by controlling the spray tip angle to the cleaning surface and the distance from the cleaning surface and by changing the spray tip. NEVER use a narrow high impact stream on a surface that is susceptible to damage. Avoid spraying windows with a narrow high impact stream. Doing so may break the window. The most sure way to avoid damaging surfaces is to follow these steps:

1.Before triggering the gun, make sure the quick connect tip you are using is appropriate for the application.

The color of the tip shows what spray angle it is:

Red – 0° – Maximum Duty

Yellow – 15° – Heavy Duty

Green – 25° – General Duty White – 40° – Light Duty

Black – 65° – Low Pressure Detergent

2.Place the spray tip approximately 4-5 feet (1,22- 1,52 m) away from the cleaning surface. Then hold the lance and spray tip at a 45 degree angle to the cleaning surface. Trigger the gun.

3.Vary the fan pattern spray angle and the distance to the cleaning surface until optimum cleaning efficiency is achieved without damaging the surface.

4.Detergent Application

NOTE: Use only detergents formulated for pressure washers.

NOTE: Test detergent in an inconspicuous area before use.

NEVER replace quick connect tip

! WARNING when gun is triggered.

DETERGENTS

The use of detergents can dramatically reduce cleaning time and assist in the removal of difficult stains. Many detergents are customized for pressure washer use on specific cleaning tasks. Pressure washer detergents are as thick as water. Using thicker detergents – like dish soap – will clog the chemical injection system and prevent the application of the detergent.

Once applied to a cleaning surface, detergents take time to break down dirt and grime. Detergents work best when applied at low pressure.

You can effectively clean surfaces by combining the chemical action of detergents with high pressure rinses. On vertical surfaces, apply the detergent starting at the bottom and work your way upward. This method prevents the detergent from sliding down and causing streaks. Begin high pressure rinsing at the bottom and work your way upward. On particularly tough stains, use a brush in combination with detergents and high pressure rinsing.

1.Follow manufacturer’s label directions for mixing correct concentrations of soap/detergents. The soap detergent to water ratio through the pump is approximately 10% (1 to 10).

2.Insert the filter end of the clear plastic detergent tube into the detergent container.

3.Use the BLACK 65° quick connect spray tip (all models) (See Figure 15).

Figure 15 - Quick Connect Tip

English — 13

Page 13 Page 15
Image 14
Page 13 Page 15
Contents 5525PW, 6027PW 9032PW, 1340PW Contents KEY to Symbols Safety GuidelinesIntroduction Dear Customer9032PW What is WHAT?1340PW 5525PW 6027PW Frequently Asked Questions Engine PumpSafety Guidelines Important Safety InstructionsSafety Guidelines Unpacking AssemblyPRE-OPERATION Husqvarna dealerFor models 6027PW, 9032PW, and 1340PW Insert Attach lance to gunTrigger Safety Latch Trigger lockStart Up OperationSurface Preparation Initial High Pressure RinseAngle to the Cleaning Surface Pressure AdjustmentAdjusting the Spray FAN Angle Detergent Application Distance from Cleaning SurfaceHOW to Avoid Damaging Surfaces DetergentsShutdown Cleaning PowerFinal Rinse StorageTips for Extending the Life of Your Pressure Washer Engine Oil Type SAE 10W-30 MaintenanceEngine OIL Changing Instructions Engine Oil CapacityChecking Pump OIL and Pump OIL Changing Pump Oil TypeMaintenance Schedule Maintenance Schedule Action neededPump Oil Capacity Technical and Consumer InformationEngine Fuel Capacity Pump Detergent SuctionTroubleshooting Chart Symptom Possible Causes Corrective ActionsTroubleshooting Chart Service Record 5525PW 6027PW 9032PW & 1340PW Pump for 5525PW Pump for 6027PW Pump for 9032PW Pump for 1340PW English Product Registration Notice English

6027PW, 1340PW, 9032PW specifications

Husqvarna, a well-known name in outdoor power equipment, offers a robust lineup of pressure washers designed for a variety of cleaning tasks. Among these, the Husqvarna 6027PW, 1340PW, and 9032PW stand out due to their advanced features, innovative technologies, and user-friendly characteristics.

The Husqvarna 6027PW is equipped with a powerful electric motor that delivers excellent pressure output, making it ideal for tackling dirt and grime on vehicles, patios, and decks. One notable feature of the 6027PW is its lightweight and compact design, which facilitates easy maneuverability and storage. This model comes with a range of nozzles that allow users to adjust the pressure according to the surface being cleaned, ensuring efficiency and optimal results.

Shifting focus to the Husqvarna 1340PW, this pressure washer brings a more powerful engine to the table, offering higher pressure output suitable for more challenging cleaning tasks. Its integrated detergent tank and foaming nozzle make it easy to apply soap for deeper cleaning. The 1340PW also features a robust frame and large wheels that enhance stability and mobility across various terrains. Additionally, the quick-connect hose and nozzles speed up the setup process, making it an excellent choice for those looking to save time while achieving professional-grade cleaning results.

Lastly, the Husqvarna 9032PW is designed for heavy-duty applications, boasting superior power and efficiency. This model features an advanced cleaning system that combines high pressure with high flow to tackle the toughest projects, such as large decks, driveways, and industrial equipment. A standout characteristic is the durable and long-lasting pump that minimizes maintenance needs while providing consistent performance. The 9032PW also incorporates safety features such as a thermal relief valve to protect against overheating and a robust safety lock on the trigger.

In conclusion, the Husqvarna 6027PW, 1340PW, and 9032PW pressure washers cater to a wide range of users, from homeowners to professionals. With their blend of innovative features, ease of use, and reliable performance, these models exemplify Husqvarna’s commitment to quality and customer satisfaction. Whether it's cleaning delicate surfaces or tackling tough grime, these pressure washers provide the power and versatility needed for various applications.
Top Page Image Contents