Husqvarna 1340PW, 9032PW, 6027PW manual Safety Guidelines, Important Safety Instructions

Page 7
! CAUTION

SAFETY GUIDELINES

Important Safety Instructions

SAVE THESE INSTRUCTIONS

The engine exhaust from

!WARNING this product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.

!WARNING

When using this product, basic precautions should ALWAYS be followed, including the following:

Read all instructions before using the product.

To reduce the risk of injury, close supervision is necessary when the product is used near children.

Follow all safety codes as well as the Occupational Safety and Health Act (OSHA).

Ensure safety devices are operating properly before each use. DO NOT remove or modify any part of the gun or unit.

Know how to stop this product and bleed pressure quickly. Be thoroughly familiar with the controls.

Stay alert – watch what you are doing.

DO NOT operate the product when fatigued or under the influence of alcohol or drugs.

Keep operation area clear of all persons.

DO NOT overreach or stand on

unstable support. Keep good footing and balance at all times.

Follow the maintenance instructions specified in the manual.

Risk of injection or ! WARNING severe injury. Keep

clear of nozzle. DO NOT discharge streams at persons. This product is to be used only by trained operators. ALWAYS remove lance from gun before cleaning debris from tip.

Keep clear of nozzle. NEVER direct high pressure spray at a person, animal, or yourself.

ALWAYS wear safety glasses or goggles and protective equipment

(hearing protection, gloves, rubber boots, protective clothing) when operating or performing maintenance.

NEVER put hand or fingers over the spray tip while operating the unit.

NEVER try to stop or deflect leaks with any body part.

6 — English

ALWAYS engage the trigger safety latch in the safe position when spraying is stopped even if only for a few moments.

ALWAYS follow detergent manufacturer’s label recommendations for proper use of detergents. ALWAYS protect eyes, skin, and respiratory system from detergent use.

DO NOT use

! WARNING pressure that exceeds the operating pressure of any of the parts (hoses, fittings, etc.) in the pressurized system. Ensure all equipment and accessories are rated to withstand the maximum working pressure of the unit.

! WARNING Explosion hazard.

• NEVER spray flammable liquids or use pressure washer in areas containing combustible dust, liquids, or vapors.

• NEVER operate this machine in a closed building or in or near an explosive environment.

• DO NOT remove fuel tank cap or fill fuel tank while engine is hot or running (allow engine to cool two minutes before refueling). ALWAYS fill the tank slowly.

• NEVER disconnect the high pressure discharge

hose from the machine while the system is pressurized. To depressurize machine, turn power and water supply off, then press the gun trigger 2-3 times.

• NEVER permanently engage the trigger mechanism on the gun.

• NEVER operate the machine without all components properly connected to the machine (handle, gun/wand assembly, nozzle, etc.).

Keep hose away from sharp objects. Bursting hoses may

cause injury. Examine hoses regularly and replace if damaged. DO NOT attempt to mend a damaged hose.

NOTICE

Equipment damage.

 

ALWAYS turn water supply “ON” before turning pressure washer “ON.” Running pump dry causes serious damage.

DO NOT operate the pressure washer with the inlet water screen removed. Keep screen clear of debris and sediment.

NEVER operate pressure washer with broken or missing parts. Check equipment regularly and repair or replace worn or damaged parts immediately.

Image 7
Contents 5525PW, 6027PW 9032PW, 1340PW Contents Safety Guidelines KEY to SymbolsDear Customer Introduction1340PW 5525PW 6027PW What is WHAT?9032PW Engine Pump Frequently Asked QuestionsImportant Safety Instructions Safety GuidelinesSafety Guidelines Husqvarna dealer AssemblyPRE-OPERATION UnpackingAttach lance to gun For models 6027PW, 9032PW, and 1340PW InsertTrigger lock Trigger Safety LatchInitial High Pressure Rinse OperationSurface Preparation Start UpAdjusting the Spray FAN Angle Pressure AdjustmentAngle to the Cleaning Surface Detergents Distance from Cleaning SurfaceHOW to Avoid Damaging Surfaces Detergent ApplicationStorage Cleaning PowerFinal Rinse ShutdownTips for Extending the Life of Your Pressure Washer Engine Oil Capacity MaintenanceEngine OIL Changing Instructions Engine Oil Type SAE 10W-30Pump Oil Type Checking Pump OIL and Pump OIL ChangingMaintenance Schedule Action needed Maintenance SchedulePump Detergent Suction Technical and Consumer InformationEngine Fuel Capacity Pump Oil CapacitySymptom Possible Causes Corrective Actions Troubleshooting ChartTroubleshooting Chart Service Record 5525PW 6027PW 9032PW & 1340PW Pump for 5525PW Pump for 6027PW Pump for 9032PW Pump for 1340PW English Product Registration Notice English

6027PW, 1340PW, 9032PW specifications

Husqvarna, a well-known name in outdoor power equipment, offers a robust lineup of pressure washers designed for a variety of cleaning tasks. Among these, the Husqvarna 6027PW, 1340PW, and 9032PW stand out due to their advanced features, innovative technologies, and user-friendly characteristics.

The Husqvarna 6027PW is equipped with a powerful electric motor that delivers excellent pressure output, making it ideal for tackling dirt and grime on vehicles, patios, and decks. One notable feature of the 6027PW is its lightweight and compact design, which facilitates easy maneuverability and storage. This model comes with a range of nozzles that allow users to adjust the pressure according to the surface being cleaned, ensuring efficiency and optimal results.

Shifting focus to the Husqvarna 1340PW, this pressure washer brings a more powerful engine to the table, offering higher pressure output suitable for more challenging cleaning tasks. Its integrated detergent tank and foaming nozzle make it easy to apply soap for deeper cleaning. The 1340PW also features a robust frame and large wheels that enhance stability and mobility across various terrains. Additionally, the quick-connect hose and nozzles speed up the setup process, making it an excellent choice for those looking to save time while achieving professional-grade cleaning results.

Lastly, the Husqvarna 9032PW is designed for heavy-duty applications, boasting superior power and efficiency. This model features an advanced cleaning system that combines high pressure with high flow to tackle the toughest projects, such as large decks, driveways, and industrial equipment. A standout characteristic is the durable and long-lasting pump that minimizes maintenance needs while providing consistent performance. The 9032PW also incorporates safety features such as a thermal relief valve to protect against overheating and a robust safety lock on the trigger.

In conclusion, the Husqvarna 6027PW, 1340PW, and 9032PW pressure washers cater to a wide range of users, from homeowners to professionals. With their blend of innovative features, ease of use, and reliable performance, these models exemplify Husqvarna’s commitment to quality and customer satisfaction. Whether it's cleaning delicate surfaces or tackling tough grime, these pressure washers provide the power and versatility needed for various applications.