Husqvarna 1340PW, 9032PW, 6027PW manual Tips for Extending the Life of Your Pressure Washer

Page 16
! WARNING

OPERATION

3.Disconnect the water supply and high pressure hose from the pump.

4.Allow the engine to cool.

5.Disconnect the spark plug wire and remove the spark plug.

6.Pour 1/2 oz. of engine oil into the spark plug hole.

NEVER pull the starter rope on the

engine when the spark plug is removed unless the spark plug hole is covered. Fuel vapor from the hole can ignite by a spark.

7.Place a rag over the spark plug hole and slowly pull the starter rope several times to distribute the oil.

8.Disconnect the high pressure hose from the pump.

9.Insert a 12” to 14” piece of garden hose into the pump inlet.

10.Place a funnel in the other end of the garden hose.

NOTICE

Read the manufacturer’s

instructions for safe handling

and disposal of RV antifreeze.

11.Pour approximately 6 oz. of RV antifreeze into the funnel.

12.Pull the starter rope several times until the RV antifreeze comes out of the pump outlet.

13.Disconnect the high pressure hose from the gun and drain the hose. Hold the gun and lance in a vertical position and squeeze the trigger to drain the water.

Never store the pressure washer ! CAUTION with gasoline in the tank inside

a building where fumes may reach an open flame or spark. Allow the engine to cool before storing in any enclosure.

NOTE: To winterize unit, please follow the same intructions for Storage.

TIPS FOR EXTENDING THE LIFE OF YOUR PRESSURE WASHER

•NEVER operate the unit without water.

•Your pressure washer is not meant to pump hot water. NEVER connect your pressure washer to a hot water supply as it will significantly reduce the life of the pump.

•Running the unit for more than two minutes without spraying water causes heat to build up in the pump. Running the unit without spraying water can damage pump components.

•Release the trigger prior to switching the lance between high and low pressure. Failure to do so may reduce the life of the o-rings in the lance.

English — 15

Page 15 Page 17
Image 16
Page 15 Page 17
Contents 5525PW, 6027PW 9032PW, 1340PW Contents KEY to Symbols Safety GuidelinesIntroduction Dear Customer1340PW 5525PW 6027PW What is WHAT?9032PW Frequently Asked Questions Engine PumpSafety Guidelines Important Safety InstructionsSafety Guidelines Assembly PRE-OPERATIONUnpacking Husqvarna dealerFor models 6027PW, 9032PW, and 1340PW Insert Attach lance to gunTrigger Safety Latch Trigger lockOperation Surface PreparationStart Up Initial High Pressure RinseAdjusting the Spray FAN Angle Pressure AdjustmentAngle to the Cleaning Surface Distance from Cleaning Surface HOW to Avoid Damaging SurfacesDetergent Application DetergentsCleaning Power Final RinseShutdown StorageTips for Extending the Life of Your Pressure Washer Maintenance Engine OIL Changing InstructionsEngine Oil Type SAE 10W-30 Engine Oil CapacityChecking Pump OIL and Pump OIL Changing Pump Oil TypeMaintenance Schedule Maintenance Schedule Action neededTechnical and Consumer Information Engine Fuel CapacityPump Oil Capacity Pump Detergent SuctionTroubleshooting Chart Symptom Possible Causes Corrective ActionsTroubleshooting Chart Service Record 5525PW 6027PW 9032PW & 1340PW Pump for 5525PW Pump for 6027PW Pump for 9032PW Pump for 1340PW English Product Registration Notice English

6027PW, 1340PW, 9032PW specifications

Husqvarna, a well-known name in outdoor power equipment, offers a robust lineup of pressure washers designed for a variety of cleaning tasks. Among these, the Husqvarna 6027PW, 1340PW, and 9032PW stand out due to their advanced features, innovative technologies, and user-friendly characteristics.

The Husqvarna 6027PW is equipped with a powerful electric motor that delivers excellent pressure output, making it ideal for tackling dirt and grime on vehicles, patios, and decks. One notable feature of the 6027PW is its lightweight and compact design, which facilitates easy maneuverability and storage. This model comes with a range of nozzles that allow users to adjust the pressure according to the surface being cleaned, ensuring efficiency and optimal results.

Shifting focus to the Husqvarna 1340PW, this pressure washer brings a more powerful engine to the table, offering higher pressure output suitable for more challenging cleaning tasks. Its integrated detergent tank and foaming nozzle make it easy to apply soap for deeper cleaning. The 1340PW also features a robust frame and large wheels that enhance stability and mobility across various terrains. Additionally, the quick-connect hose and nozzles speed up the setup process, making it an excellent choice for those looking to save time while achieving professional-grade cleaning results.

Lastly, the Husqvarna 9032PW is designed for heavy-duty applications, boasting superior power and efficiency. This model features an advanced cleaning system that combines high pressure with high flow to tackle the toughest projects, such as large decks, driveways, and industrial equipment. A standout characteristic is the durable and long-lasting pump that minimizes maintenance needs while providing consistent performance. The 9032PW also incorporates safety features such as a thermal relief valve to protect against overheating and a robust safety lock on the trigger.

In conclusion, the Husqvarna 6027PW, 1340PW, and 9032PW pressure washers cater to a wide range of users, from homeowners to professionals. With their blend of innovative features, ease of use, and reliable performance, these models exemplify Husqvarna’s commitment to quality and customer satisfaction. Whether it's cleaning delicate surfaces or tackling tough grime, these pressure washers provide the power and versatility needed for various applications.
Top Page Image Contents