Cleaning Power, Final Rinse, Shutdown, Storage

! CAUTION

OPERATION

GENERAL CLEANING TIPS

1.Apply the detergent so that it thoroughly covers the cleaning surface. Apply the detergent from bottom to top to prevent the detergent from sliding down and streaking. Wait a couple of minutes for the detergent to break down the dirt and grime. Use a brush to lightly scrub heavily soiled areas. NEVER allow the detergent to dry on the cleaning surface.

2.Replace black 65° quick connect tip with another color tip.

NEVER replace quick connect tip

! WARNING when gun is triggered.

3. After using detergents, flush the suction system

by placing the detergent suction tube into a bucket of clean water.

5. Cleaning Power

The easiest way to regulate the cleaning power of your pressure washer is by changing the distance from the surface you are cleaning. Begin spraying with a wide fan pattern while standing several feet from the surface. Slowly move closer to the object you are cleaning, adjusting the spray pattern as necessary, until you find the most effective cleaning technique.

NOTE: Some units also may have a pressure adjustment knob on the pump that can adjust the pressure (models 9032PW and 1340PW).

6. Final Rinse

The final rinse should start at the bottom and work upward. Make sure that you thoroughly rinse the surface and that you remove all detergent.

7. Shutdown

1.Be sure all detergent is flushed from system.

2.Turn the engine OFF.

3 Turn the water supply OFF.

4.After the engine and water supply are turned OFF, trigger the gun to depressurize the system.

NEVER turn the water supply

NOTICE off before turning the engine/motor off. Serious damage could occur to the pump and/or engine/motor.

NEVER disconnect the high pressure discharge hose from

the machine while the system is pressurized. To depressurize, turn engine/motor off, turn water supply off and squeeze gun trigger 2-3 times.

PRESSURE RELIEF

PROCEDURE

To reduce the risk of bodily injury or property damage, ALWAYS follow this procedure whenever spraying is stopped, when work is completed, and before checking or repairing any part of the system.

1.Engage the trigger safety latch.

2.Turn the unit off.

3.Shut off the water supply.

4.Disengage the trigger safety latch and trigger the gun to relieve pressure.

5.Re-engage the trigger safety latch.

6.Before overnight storage, long term storage, or transporting unit, disconnect the water supply and turn off the fuel supply valve.

5.After each use, when engine has cooled, wipe all surfaces of the pressure washer with a clean, damp cloth.

•DO NOT store the pressure washer outdoors.

•DO NOT store the pressure washer where it might freeze unless it has been properly winterized.

8. Storage

LONG TERM STORAGE INSTRUCTIONS (MORE THAN 30 DAYS IN STORAGE)

1.Remove fuel from the tank and run the pressure washer in a normal operating mode until the engine stops from a lack of fuel. Normal operating mode means actually spraying water from the gun while the engine is running.

Alternate method – Add fuel stabilizer to gas in the tank and run in normal operating mode for at least five minutes.

2.Stop the engine, turn off the water supply, and trigger the gun to release pressure in the high- pressure hose.

14 — English

6027PW, 1340PW, 9032PW specifications

Husqvarna, a well-known name in outdoor power equipment, offers a robust lineup of pressure washers designed for a variety of cleaning tasks. Among these, the Husqvarna 6027PW, 1340PW, and 9032PW stand out due to their advanced features, innovative technologies, and user-friendly characteristics.

The Husqvarna 6027PW is equipped with a powerful electric motor that delivers excellent pressure output, making it ideal for tackling dirt and grime on vehicles, patios, and decks. One notable feature of the 6027PW is its lightweight and compact design, which facilitates easy maneuverability and storage. This model comes with a range of nozzles that allow users to adjust the pressure according to the surface being cleaned, ensuring efficiency and optimal results.

Shifting focus to the Husqvarna 1340PW, this pressure washer brings a more powerful engine to the table, offering higher pressure output suitable for more challenging cleaning tasks. Its integrated detergent tank and foaming nozzle make it easy to apply soap for deeper cleaning. The 1340PW also features a robust frame and large wheels that enhance stability and mobility across various terrains. Additionally, the quick-connect hose and nozzles speed up the setup process, making it an excellent choice for those looking to save time while achieving professional-grade cleaning results.

Lastly, the Husqvarna 9032PW is designed for heavy-duty applications, boasting superior power and efficiency. This model features an advanced cleaning system that combines high pressure with high flow to tackle the toughest projects, such as large decks, driveways, and industrial equipment. A standout characteristic is the durable and long-lasting pump that minimizes maintenance needs while providing consistent performance. The 9032PW also incorporates safety features such as a thermal relief valve to protect against overheating and a robust safety lock on the trigger.

In conclusion, the Husqvarna 6027PW, 1340PW, and 9032PW pressure washers cater to a wide range of users, from homeowners to professionals. With their blend of innovative features, ease of use, and reliable performance, these models exemplify Husqvarna’s commitment to quality and customer satisfaction. Whether it's cleaning delicate surfaces or tackling tough grime, these pressure washers provide the power and versatility needed for various applications.