Harbor Freight Tools 47761 manual Pressure Changes During USE, Detergent will not Dispense

Page 24

TROUBLESHOOTING (CONTINUED)

IMPORTANT!

Be CERTAIN to shut off the Pressure Washer, release all pressure in a safe manner, and disconnect it from power and water before adjusting, cleaning, or repairing the unit.

PRESSURE CHANGES DURING USE

Air may be getting in the water supply hose, check all connections.

CONNECTIONS

ARE LOOSE

Retighten

connections.

TIP IS

DIRTY

Clean tip, using the includedTip Cleaner (I).

ALL CONNECTIONS

ARE TIGHT

Check that tip is free from debris and deposits.

TIP IS

CLEAN

Internal valves or seals may be worn or sticking, contact a qualified technician.

DETERGENT WILL NOT DISPENSE

Verify that proper type of pressure washer detergent is being used, see page 12, #5.

NON-PRESSURE
WASHER DETERGENT	CORRECT DETERGENT
USED	USED

Open the Detergent Bottle (H) and rinse it out thoroughly. Refill with correct detergent.

Open the Detergent Bottle

(H)and check that the suction tube is not bent or pinched.

If the steps above do not solve the problem or if the repairs involved are too

complex, contact a qualified technician.

SKU 47761

For technical questions, please call 1-800-444-3353.

PAGE 24

Image 24

Contents For technical questions or replacement parts, please call Pressure Washer with CartContents Specifications SafetyGeneral Safety Rules Save this ManualElectrical Safety Personal SafetyService Tool USE and CareSpecific Safety Rules Do not handle the Gfci Plug 95 with wet handsSKU Grounding Grounded Tools Tools with Three Prong PlugsSymbology Extension CordsSee Table a Assembly Parts Diagrams on pagesSee Figure C, below Controls and Setup Controls and FeaturesAlter or disable the Gfci Power Plug Troubleshooting section at end of manual See Figure EFor technical questions, please call Setup Operation See Figure C,Operatingtips Become Familiar with Your MachineUSE Proper Pressure Washer Operation Techniques Cleaning Recommendations 3a. For a vertical or sloped surface3b. For a flat surface INSPECTION, MAINTENANCE, and Cleaning Do not use damaged equipmentParts Lists and Diagrams Main Parts ListMain Parts Diagram Parts List and Diagram a Assembly Parts List and Diagram Please Read the Following CarefullyTroubleshooting Water Leaking from Within the HousingPressure Washer Stops Suddenly SKU For technical questions, please callTroubleshooting Pressure Washer will not StartPressure Washer does not Build Pressure Clean tip, using the includedTip Cleaner Pressure Changes During USEDetergent will not Dispense Check that tip is free from debris and deposits