Harbor Freight Tools 47761 manual Grounding, Grounded Tools Tools with Three Prong Plugs

Page 8

GROUNDING

WARNING!

Improperly connecting the grounding wire can result in the risk of electric shock. Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the power cord plug provided with

the tool. Never remove the grounding prong from the plug. Do not use the tool if the power cord or plug is damaged. If damaged, have it repaired by a service facility before use. If the plug will not fit the outlet, have a proper outlet installed by a qualified electrician.

GROUNDED TOOLS: TOOLS WITH THREE PRONG PLUGS

1.Tools marked with “Grounding Required” have a three wire cord and three prong grounding plug. The plug must be connected to a properly grounded outlet. If the tool should electrically malfunction or break down, grounding provides a low resistance path to carry electricity away from the user, reducing the risk of electric shock. (See Figure A, next page.)

2.The grounding prong in the plug is connected through the green wire inside the cord to the grounding system in the tool. The green wire in the cord must be the only wire connected to the tool’s grounding system and must never be attached to an electrically “live” terminal. (See Figure A.)

3.Your tool must be plugged into an appropriate outlet, properly installed and grounded in accordance with all codes and ordinances. The plug and outlet should look like that in the following illustration. (See Figure A.)

3-PRONG PLUG

ELECTRICAL OUTLET

FIGURE A

SKU 47761

For technical questions, please call 1-800-444-3353;

PAGE 8

Troubleshooting section at end of manual.

 

 

Page 7 Page 9
Image 8
Page 7 Page 9
Contents For technical questions or replacement parts, please call Pressure Washer with CartContents Specifications SafetyGeneral Safety Rules Save this ManualElectrical Safety Personal SafetyService Tool USE and CareSpecific Safety Rules Do not handle the Gfci Plug 95 with wet handsSKU Grounding Grounded Tools Tools with Three Prong PlugsSee Table a SymbologyExtension Cords See Figure C, below AssemblyParts Diagrams on pages Alter or disable the Gfci Power Plug Controls and SetupControls and Features For technical questions, please call Troubleshooting section at end of manualSee Figure E Setup Operation See Figure C,USE Proper Pressure Washer Operation Techniques OperatingtipsBecome Familiar with Your Machine 3b. For a flat surface Cleaning Recommendations3a. For a vertical or sloped surface INSPECTION, MAINTENANCE, and Cleaning Do not use damaged equipmentParts Lists and Diagrams Main Parts ListMain Parts Diagram Parts List and Diagram a Assembly Parts List and Diagram Please Read the Following CarefullyTroubleshooting Water Leaking from Within the HousingPressure Washer Stops Suddenly SKU For technical questions, please callPressure Washer does not Build Pressure TroubleshootingPressure Washer will not Start Clean tip, using the includedTip Cleaner Pressure Changes During USEDetergent will not Dispense Check that tip is free from debris and deposits

47761 specifications

Harbor Freight Tools is known for providing high-quality tools at affordable prices, and the 47761 model exemplifies this commitment. The 47761 is a versatile, compact air compressor, designed for various applications, from powering pneumatic tools to inflating tires and sports equipment.

One of the main features of the Harbor Freight Tools 47761 is its powerful 1.5 horsepower motor, which delivers an impressive maximum pressure of 125 psi. This ensures that users have enough power for demanding tasks while maintaining efficiency and performance. The compressor is equipped with a 3-gallon tank, which strikes a balance between portability and capacity, making it suitable for both home and professional use.

The compressor features a direct drive system that allows for low maintenance, as there are fewer moving parts compared to belt-driven models. Its lightweight design makes it easy to transport to job sites or store in tight spaces. Weighing in at just over 50 pounds, the 47761 is user-friendly, which is particularly beneficial during long tasks where convenience matters.

In terms of technologies, the Harbor Freight 47761 utilizes an oil-less pump. This means users do not need to worry about changing oil regularly, which can save time and resources. Additionally, the oil-less design reduces the chances of oil contamination, resulting in cleaner and safer operation.

Another significant characteristic of the 47761 is its noise level. Operating at a sound level of around 68 decibels, it is quieter than many standard compressors, providing a more pleasant working environment. An integrated pressure gauge allows for easy monitoring of the tank's pressure, enabling precision in various tasks.

The 47761 model is also equipped with overheating protection. This safety feature automatically shuts off the compressor if it becomes too hot, extending the lifespan of the unit and ensuring user safety.

Moreover, the compressor comes with a set of essential accessories, including an air hose and quick connect fittings, allowing users to start their projects immediately.

Overall, the Harbor Freight Tools 47761 is a reliable air compressor that combines power, efficiency, and ease of use, making it an excellent choice for DIY enthusiasts and professionals alike.
Top Page Image Contents