Harbor Freight Tools 47761 Specific Safety Rules, Do not handle the Gfci Plug 95 with wet hands

Page 6

SPECIFIC SAFETY RULES

1.Maintain a safe working environment. Keep the work area well lit. Make sure there is adequate surrounding workspace. Always keep the work area free of obstructions, grease, oil, trash, and other debris. Do not use the Pressure Washer in areas near flammable chemicals, dusts, and vapors.

2.Maintain labels and nameplates on the Pressure Washer. These carry important information. If unreadable or missing, contact Harbor Freight Tools for a replacement.

3.WARNING! Risk of injection or severe injury. Keep clear of Nozzle. Do not direct discharge stream at people or animals. Keep the work area clear of all people and animals.

4.Use the right product for the right job. There are certain applications for which this product was designed. Do not use small equipment, tools, or attachments to do the work of larger industrial equipment, tools, or attachments. Do not use this product for a purpose for which it was not intended.

5.This product must continuously run with cold water only. Never use hot water. Dry running will cause serious damage to the seals. Make sure the water supply used for the Pressure Washer is not dirty, sandy, and does not contain any corrosive chemical products.

6.To avoid electrical shock, never start and run the Pressure Washer in the rain. Never allow water to leak inside the Body of the Pressure Washer. Do not direct discharge stream at the Pressure Washer itself or at other live electrical equipment.

7.Do not allow the GFCI Plug (95) to become wet. Always place the GFCI Plug in a dry location and as far away as possible from the object being sprayed. Keep all electrical connections dry and off the ground.

8.When using the Pressure Washer, always maintain a firm grip on the Gun Assembly (E) with both hands. Squeezing the Trigger of the Gun Assembly causes a kickback force.

9.Do not pull or carry the Power Washer by its Power Cord (95), or pull the Cord around sharp corners or edges. Do not unplug the Power Washer by pulling on the Cord. Keep the Cord away from heated surfaces.

10.Do not handle the GFCI Plug (95) with wet hands.

11.Avoid unintentional starting. Make sure you are prepared to begin work before turning on the Pressure Washer.

12.The work area should have adequate drainage to reduce the possibility of a fall due to slippery surfaces.

13.This Pressure Washer is intended for outdoor residential use only.

SKU 47761

For technical questions, please call 1-800-444-3353;

PAGE 6

Troubleshooting section at end of manual.

 

 

Page 5 Page 7
Image 6
Page 5 Page 7
Contents For technical questions or replacement parts, please call Pressure Washer with CartContents General Safety Rules SpecificationsSafety Save this ManualElectrical Safety Personal SafetyService Tool USE and CareSpecific Safety Rules Do not handle the Gfci Plug 95 with wet handsSKU Grounding Grounded Tools Tools with Three Prong PlugsSymbology Extension CordsSee Table a Assembly Parts Diagrams on pagesSee Figure C, below Controls and Setup Controls and FeaturesAlter or disable the Gfci Power Plug Troubleshooting section at end of manual See Figure EFor technical questions, please call Setup Operation See Figure C,Operatingtips Become Familiar with Your MachineUSE Proper Pressure Washer Operation Techniques Cleaning Recommendations 3a. For a vertical or sloped surface3b. For a flat surface INSPECTION, MAINTENANCE, and Cleaning Do not use damaged equipmentParts Lists and Diagrams Main Parts ListMain Parts Diagram Parts List and Diagram a Assembly Parts List and Diagram Please Read the Following CarefullyPressure Washer Stops Suddenly TroubleshootingWater Leaking from Within the Housing SKU For technical questions, please callTroubleshooting Pressure Washer will not StartPressure Washer does not Build Pressure Detergent will not Dispense Clean tip, using the includedTip CleanerPressure Changes During USE Check that tip is free from debris and deposits

47761 specifications

Harbor Freight Tools is known for providing high-quality tools at affordable prices, and the 47761 model exemplifies this commitment. The 47761 is a versatile, compact air compressor, designed for various applications, from powering pneumatic tools to inflating tires and sports equipment.

One of the main features of the Harbor Freight Tools 47761 is its powerful 1.5 horsepower motor, which delivers an impressive maximum pressure of 125 psi. This ensures that users have enough power for demanding tasks while maintaining efficiency and performance. The compressor is equipped with a 3-gallon tank, which strikes a balance between portability and capacity, making it suitable for both home and professional use.

The compressor features a direct drive system that allows for low maintenance, as there are fewer moving parts compared to belt-driven models. Its lightweight design makes it easy to transport to job sites or store in tight spaces. Weighing in at just over 50 pounds, the 47761 is user-friendly, which is particularly beneficial during long tasks where convenience matters.

In terms of technologies, the Harbor Freight 47761 utilizes an oil-less pump. This means users do not need to worry about changing oil regularly, which can save time and resources. Additionally, the oil-less design reduces the chances of oil contamination, resulting in cleaner and safer operation.

Another significant characteristic of the 47761 is its noise level. Operating at a sound level of around 68 decibels, it is quieter than many standard compressors, providing a more pleasant working environment. An integrated pressure gauge allows for easy monitoring of the tank's pressure, enabling precision in various tasks.

The 47761 model is also equipped with overheating protection. This safety feature automatically shuts off the compressor if it becomes too hot, extending the lifespan of the unit and ensuring user safety.

Moreover, the compressor comes with a set of essential accessories, including an air hose and quick connect fittings, allowing users to start their projects immediately.

Overall, the Harbor Freight Tools 47761 is a reliable air compressor that combines power, efficiency, and ease of use, making it an excellent choice for DIY enthusiasts and professionals alike.
Top Page Image Contents