Graco Inc 826, 800-268, 800-093, 1235 Ground Fault Circuit Interrupter Protection, Extension Cords

Page 3

GROUND FAULT CIRCUIT INTERRUPTER PROTECTION (826)

The 826 pressure washer is provided with a

ground-fault circuit-interrupter (GFCI) built into the power supply cord. This device provides additional protection from the risk of electric shock. Should replacement of the cord become necessary, use only

identical replacement parts that include GFCI protection.

CAUTION

DO NOT use the switch on the GFCI cord to start the unit. This may cause premature failure of the GFCI. ALWAYS turn the machine off at the switch before resetting the GFCI.

GROUND FAULT CIRCUIT INTERRUPTER PROTECTION (1235)

To comply with

the National

Electrical

Code

(NFPA 70)

receptacle

that

is protected

by a ground-fault

and to provide

additional

protection

from

the risk of

circuit-interrupter

(GFCI).

 

electric shock, connect the 1235 pressure washer to a

 

 

 

 

EXTENSION CORDS

Use only 3-wire extension cords that have 3-prong grounding-type plugs and 3-pole cord connectors that accept the plug from the product. Use only extension cords that are intended for outdoor use. These extension cords are identified by a marking “Acceptable for use with outdoor appliances; store indoors while not in use.” Use only extension cords having an electrical rating not less than the rating of the product. Do not use damaged extension cords. Examine extension cord before using and replace if damaged. Do not abuse extension cord and do not yank or pull on any cord to

EQUIPMENT MISUSE HAZARD

General Safety

Any misuse of the pressure washer or accessories,

such as overpressurizing, modifying parts, using incompatible chemicals and fluids, or using worn or damaged parts, can cause them to rupture and result in fluid injection, splashing in the eyes or on the skin, or other serious bodily injury, fire, explosion or property damage.

NEVER alter or modify any part of this equipment; doing so could cause it to malfunction.

CHECK all spray equipment regularly and repair or replace worn or damaged pans immediately.

ALWAYS wear protective eyewear and appropriate clothing. If using a chemical injector, read and follow

the chemical manufacturer’s literature for recommendations on additional protective equipment, such as a respirator.

disconnect. Keep cord away from heat and sharp edges. Always disconnect the extension cord from the receptacle before disconnecting the product from the extension cord.

To reduce the risk of electrocution, keep all connections dry and off the ground. Do not touch

/,,,,,,,,,.,^‘“lNG_?

System Pressure

This sprayer can develop high operating pressure. Be sure that all spray equipment and accessories are rated to withstand the maximum working pressure of this sprayer. DO NOT exceed the maximum working pressure of any component or accessory used in the system.

Chemical Compatibilityail

BE SURE that chemicals used in the chemical injector are compatible with the wetted parts of the hose, gun, wand and tip, as given in the Technical Data (page 22). Always read the chemical manufacturer’s literature before using any chemical in this pressure washer.

308-518 3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents HYDRA-CLEAN Model 800-093, Series BModel 800-268, Series a Grounding Instructions General SafetyPressure Relief Procedure Spray Gun Safety DevicesGround Fault Circuit Interrupter Protection Extension CordsEquipment Misuse Hazard Page Set Up Check for Shipping DamageConnect to Water Supply Chemical Injector Trigger Safety ’ Latch Shown \ Engaged \ Disengaged Trigger Safety LatchInstalling and Changing Spray Tips Follow the Pressure Relief ProcedureMaintenance SHUTDOWN, Flushing and StorageInterval What to do Cause Troubleshooting ChartProblem SolutionValves Pumping SectionServicing Plungers Servicing the V-Packings WHT-I Hydra-Clean@ 826 Pressure Washer’ft Part DescriptionParts Drawing Hydra-Clean@ 1235 Pressure WasherNO. NO. DESCRIPTIONQlY REF PartPump and Motor Assembly Parts ListPart Description QTY Pump Assembly, 800 psi Qty QTYPump Assembly, 1200 psi Description Incl 1200 psiInlet Pressure Regulator AccessoriesANTI-FREEZE Flush KIT Upstream Chemical Injector KITPage Graco Warranty Important Phone NumbersGraco INC. P.O. BOX 1441 MINNEAPOLIS, MN

308-518, 826, 800-093, 1235, 800-268 specifications

Graco Inc is a leading manufacturer of fluid handling systems and products, renowned for its innovative technologies and a wide range of applications across industries. Headquartered in Minneapolis, Minnesota, Graco has established a reputation for producing high-quality equipment designed to handle, apply, and manage fluids with precision and efficiency.

One of the key features of Graco's product lineup is its extensive array of pumps. These pumps come in various configurations, including air-operated, electric, and hydraulic versions, ensuring that they can meet the diverse needs of various applications. This versatility allows Graco to service industries such as automotive, construction, and manufacturing, where fluid handling is critical.

Graco is also at the forefront of technology integration. Their products often feature advanced electronic controls that enhance operability and efficiency. For example, some of their spray equipment is equipped with intelligent technology that provides real-time feedback and monitoring, which helps users optimize their processes and improve overall productivity.

In addition to pumps, Graco offers a comprehensive range of accessories, including hoses, fittings, and filters, which are essential for maintaining system performance. Their commitment to quality means that these components are robust and designed to withstand the rigors of high-pressure and high-demand environments.

Another notable characteristic of Graco products is their emphasis on safety. The company designs its equipment with user safety in mind, incorporating features such as anti-static technology and ergonomic designs to reduce fatigue during operation. This focus on safety ensures that users can operate equipment with confidence while minimizing the risk of accidents.

Graco's dedication to sustainability is also evident in its product offerings. Many of their systems are designed to reduce waste and improve efficiency, aligning with modern environmental standards. This eco-friendly approach not only benefits the planet but also helps customers reduce operating costs.

In summary, Graco Inc excels in providing innovative fluid handling solutions that are characterized by versatility, advanced technology, safety features, and a commitment to sustainability. Whether it's for industrial applications or specialized tasks, Graco's comprehensive product range is designed to meet the highest standards of performance and reliability.
Top Page Image Contents