Graco Inc 308-530, 800-700, 800-699 manual Trigger Safety Latch, Installing and Changing Spray Tips

Page 7

Trigger Safety Latch

WARNING

To reduce the risk of serious bodily injury

,

including fluid injection, splashing in the eyes or

 

on the skin, ALWAYS engage the trigger safety

 

latch whenever spraying stops, even for a

 

moment.

 

In the engaged position, the trigger safety latch prevents the gun from being triggered accidentally by hand or if it is dropped or bumped. Be sure the latch is pushed fully down when engaging it or it cannot prevent the gun from being triggered. See Figure 2.

TRIGGER SAFETY LATCH SHOWN ENGAGED

TRIGGER SAFETY LATCH SHOWN

Installing and Changing Spray Tips

WARNING

To reduce the risk of serious bodily injury, including fluid injection or splashing in the eyes or onto the skin, use extreme caution when changing spray tips. ALWAYS follow the procedure below.

1.Follow the Pressure Relief Procedure.

2.Point the gun and wand away from yourself and anyone else.

3.Without holding your hand over the spray tip (A), pull back the quick coupler ring (B). Remove the old tip and/or install a new one, and then release the ring. See Figure 3.

4.Be sure the tip is secure before starting to spray again.

5.Tip holding holes are provided on the chassis.

CAUTION

To avoid blowing the o–ring out of the quick coupler, due to the high pressure in the system, never operate the pressure washer without a tip securely mounted in the quick coupler.

A

B

Figure 2

DISENGAGED

Figure 3

308–530 7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents 800-699, Series a 1535 2040 2540Rev a 800-698, Series aTerms IndexMoving Parts Hazard General SafetyPressure Relief Procedure Spray Gun Safety DevicesSystem Pressure Hose SafetyEquipment Misuse Hazard Fuel and Emission HazardsCheck for Shipping Damage InstallationSet Up 1535Startup Installing and Changing Spray Tips Trigger Safety LatchFollow the Pressure Relief Procedure Interval What to do MaintenancePressure Relief Procedure SHUTDOWN, Flushing StorageProblem Troubleshooting ChartParts Drawing Hydra-Cleanr1535 Pressure WasherPart Description QTY Parts ListHydra-Cleanr2040 Pressure Washer WASHER, Flat 3/8 804-249 Assembly incl 802-139 Hydra-Cleanr2540 Pressure Washer FILTER/STRAINER Replacing the Oil Seal Gear Reducer Service ModelReplacing the O-Ring Replacing the GasketBearing Gear Reducer ModelReplacing the Oil Seals Gear Reducer Service Models 2040Gear Reducer Models 2040 Pump Assembly, 1500 psi 804-101 Kit Repair Kit Description Qty 804-102Pump Assembly, 2000 psi 804-096 Kit Repair Kit Description Qty 804-100Pump Assembly, 2500 psi Kit Repair Kit Description Qty 804-098 804-234 STUD, Retaining 6mm x 64,5mm804-097 Servicing the Valves Pump Service ModelServicing the Seals Servicing Crankcase Section ReassemblyTorque Chart Pump Part Thread Tool Size Servicing the PlungersServicing the Seals and V-Packings Pump Service Models 2040308-530 Reassembly Servicing the Pumping SectionLow Pressure Seal-All Models ReassemblyPacking Models High Pressure Seal ModelsDownstream Chemical Injector KIT 800-117 AccessoriesModel Technical DataImportant Phone Numbers Graco WarrantyGraco INC. P.O. BOX 1441 MINNEAPOLIS, MN

800-700, 308-530, 800-698, 800-699 specifications

Graco Inc is a renowned manufacturer specializing in fluid handling systems used in a variety of applications, particularly in industries such as construction, automotive, and manufacturing. Among their extensive product lineup, models 800-699, 800-698, 308-530, and 800-700 stand out for their innovative features and advanced technologies.

The Graco 800-699 is a versatile air-operated double diaphragm pump designed for high efficiency and reliable performance. Its robust construction includes a corrosion-resistant housing ideal for handling tough fluids. The pump can effectively operate at various pressures, making it suitable for tasks ranging from transferring chemicals to applying coatings. With its easy maintenance design, operators can quickly access key components, minimizing downtime.

Model 800-698 shares similar attributes but is distinguished by its emphasis on portability and ergonomic design. This pump model is lightweight and features a compact form factor, allowing easier transport and setup for mobile applications. Its intuitive controls enable precise flow rate adjustments, giving operators enhanced control over their fluid-handling tasks. Additionally, it is designed for compatibility with a wide range of fluids, enhancing its versatility across different applications.

The 308-530 model is notable for its electric-driven technology. This feature makes it ideal for environments where compressed air is not available or where a quieter operation is required. The 308-530 is equipped with advanced control systems that optimize energy consumption without compromising performance. Moreover, its integrated safety features ensure reliable operation while protecting both the equipment and the operator.

Finally, the Graco 800-700 represents the pinnacle of efficiency in fluid transfer systems. This model utilizes state-of-the-art technology to provide faster flow rates and improved material compatibility. The 800-700 is engineered to handle a wide range of viscous materials, making it perfect for heavy-duty applications. The modular design allows for easy upgrades, ensuring users can keep pace with emerging technologies without extensive disruptions to their operations.

Collectively, these Graco models embody a commitment to quality, durability, and user-friendly design, allowing companies to streamline their processes and enhance productivity in fluid handling tasks. With ongoing advancements and a focus on customer satisfaction, Graco Inc continues to be a leader in this industry.
Top Page Image Contents