8 Insert the large gear into the large
holder on the imaging film cartridge (make sure it clicks into place), and then insert the small gear on the other end of the spool into its holder.
9 Cut the band that holds the two
spools together. Unroll the film slightly and insert the small gears into their holders.
10 Turn the cartridge over, grasp the
handle, and insert the cartridge into the print compartment.
Loading the Imaging Film
11 Rotate the large gear toward you
until the film is taut.
12 Close the print compartment cover
(press down on both sides to make sure it clicks into place), and then close the operation panel.
Click!
1. Installation
15
