Temporarily turning off OpenLCR

Setting Up and Using OpenLCR

Your fax will automatically

To stop using OpenLCR call OpenLCR within the (Blinking) next 24 hours to learn when

correct rate data will be available.

Your fax did not receive rate data because OpenLCR was unable to identify it by Caller ID. To remove the “H” display, press the OpenLCR key followed by

#, 1, 8, 4, and #. To receive OpenLCR service, you will need to contact your phone company and allow it to send your Caller ID information when you place calls. After this, register once again with OpenLCR.

Temporarily turning off OpenLCR

If needed, you can temporarily turn off OpenLCR.

When you temporarily turn off OpenLCR, long distance and international calls will not be routed by OpenLCR. However, your fax will still call OpenLCR periodically to receive rate data.

1 Press these keys:

FUNCTION

7

LCR DIAL SELECT

2 Press 2 (NO) to turn off OpenLCR. (Press 1 (YES) to turn it back on.)

2

When you turn off OpenLCR, the highlighted “C” in the display will change to -”.

3 Press the STOP key to return to the date and time display.

STOP

To stop using OpenLCR

Press the following sequence of keys if you want to stop using the Open LCR feature.

1 8 4

OpenLCR

Calls will not be routed by OpenLCR and the fax machine will not call OpenLCR to update data.

To resume use of OpenLCR, press these keys:

1 8 6

OpenLCR

32

Page 34
Image 34
Sharp UX-340LM manual Temporarily turning off OpenLCR, To stop using OpenLCR