3 Check the display. If the name or number shown is correct, press the START/MEMORY key. (If not, press the STOP key and then repeat Step 2.)
START/MEMORY
Direct Keypad Dialing
You can also enter a full number with the number keys and then press the START/MEMORY key to begin dialing. You can use this method to dial a full number when you don’t need to speak to the other party before faxing.
1 Load the document(s).
READY TO SEND
•Set the resolution and/or contrast if desired.
RESOLUTION
Sending a Fax by Automatic Dialing
2 Enter the number of the receiving
machine by pressing the numeric
keys. | ABC | DEF |
|
1 | 2 | 3 |
|
GHI | JKL | MNO |
|
4 | 5 | 6 |
|
PQRS | TUV | WXYZ |
|
7 | 8 | 9 | Documents |
|
| Sending3. | |
• If a pause is required between any |
| ||
of the digits to access a special service or an outside line, press the REDIAL key (two seconds per pause). The pause will appear as a hyphen. Several pauses can be entered in a row.
3 Check the display. If the number of the receiving machine shown is correct, press the START/ MEMORY key.
START/MEMORY
•If it is not correct, press the STOP key to backspace and clear one digit at a time, and then
Searching for an
If you don’t remember the Rapid Key or Speed Dial number in which you have programmed a particular fax number, you can search for the number by following the steps below. Once you have found the number, you can dial and transmit the loaded document by simply pressing the START/MEMORY key.
49
