Messages and Signals
Messages and Signals
Display messages
Note: If you have turned on the Caller ID function, see Caller ID in Chapter 8 for display messages related to Caller ID.
CHECK PAPER SIZE | The paper size setting is incorrect. Change the paper |
| size setting as explained on page 18. |
|
|
COVER OPEN | The print compartment cover (under the operation panel) |
| is open. Open the operation panel (grasp the top and |
| pull toward you), and then press down firmly on both |
| sides of the print compartment cover to close it. |
|
|
DOCUMENT JAMMED | The original document is jammed. See the following |
| section, Clearing Paper Jams. |
|
|
FAX RX IN MEMORY | A fax has been received in memory because the imaging |
| film needs replacement, you have run out of printing |
| paper, or the paper is jammed. The fax will print out |
| automatically when the problem is fixed. |
|
|
FILM END | The imaging film may need replacement. Check the film |
| and replace if necessary. |
|
|
FUNCTION MODE | The FUNCTION key has been pressed. |
|
|
HOLD | The HOLD/SEARCH key has been pressed to put the |
| other party on hold during a phone conversation. Press |
| the HOLD/SEARCH again to take the other party off |
| hold. |
|
|
LCR DOWNLOADING | The fax machine has called OpenLCR and is receiving |
| carrier rate data. This message only appears if you have |
| registered with OpenLCR. |
|
|
DOWNLOAD ERROR | The fax machine was unable to download rate data from |
| OpenLCR. Try downloading the data manually as |
| explained in Downloading (receiving) the rate data |
| manually on page 29. |
|
|
LINE ERROR | Transmission or reception was not successful. Press the |
| STOP key to clear the message and then try again. If the |
| error persists, see Line Error on page 95. |
|
|
100
