Graco Inc 207-860 warranty For Mounting on Open 55 Gallon Supply Drum, Model 205-985, Series C

Page 1

INSTRUCTIONS-PARTS LIST

306–993

This manual contains important warnings and information.

READ AND KEEP FOR REFERENCE.

INSTRUCTIONS

First choice when quality counts.

Rev. D

Supersedes Rev. B

and PCN C

Hydra-Clean)Pressure Washers

42 bar, 4.2 MPa (600 psi) Maximum Working Pressure

For Mounting on Open 55 Gallon Supply Drum

(Can be wall mounted with accessory bracket)

Model 205–985, Series C

Includes 5:1 Ratio Monark Pump with Neoprene and UHMWPE packings, drum mounting bracket, suction hose, air line lubricator, 40 ft. spray hose, Hydra–Cleangun and spray tip.

Model 207–860, Series B

Includes 5:1 Ratio Monark Pump with UHMWPE and PTFEpackings, drum mounting bracket, suction hose and air line lubricator.

CAUTION

The Graco warranty will not apply if abrasive or corrosive materials, other than those Graco recom- mends are used with this unit.



GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440–1441

http://www.graco.com

COPYRIGHT 1996, GRACO INC.

Graco Inc. is registered to I.S. EN ISO 9001

Image 1
Contents Model 205-985, Series C For Mounting on Open 55 Gallon Supply DrumModel 207-860, Series B Symbols Table of ContentsInjection Hazard Fire and Explosion Hazard Grounding SetupGeneral Information Connect Hoses and Mount Pump 363 Operation Pressure Relief ProcedureUseful Hints Before UsingShutdown and Care of Unit Problem Cause Solution TroubleshootingGeneral ServiceParts Model Monark Hydra-Clean Stainless Steel Spray Tips AccessoriesStainless Steel Blasting Tips Technical Data DimensionsGraco Phone Number Graco Standard Warranty