Husky HU80522 manual Specific Safety Rules

Page 4

SPECIFIC SAFETY RULES

Never direct a water stream toward people or pets, or any electrical device.

Before starting any cleaning operation,close doors and windows. Clear the area to be cleaned of debris, toys, outdoor furniture, or other objects that could create a hazard.

Never pick up or carry a machine while the engine is running.

Never start the machine if ice has formed in any part of the equipment.

Do not use acids, alkalines, solvents, flammable material, bleaches, or industrial grade solutions in this product. These products can cause physical injuries to the operator and irreversible damage to the machine.

Always operate the machine on a level surface. If the engine is on an incline, it could seize due to improper lubrication (even at the maximum oil level).

WARNING: High pressure jets can be dangerous if subject to misuse. The jet must not be directed at persons, animals, electrical devices, or the machine itself.

Never attempt to make any adjustments while the engine (motor) is running (except where specifically recommended by the manufacturer).

Protective covers must always cover rotating parts when the engine is running.

Keep cooling air intake (recoil starter area) and muffler side of the engine at least 3 feet away from buildings, obstructions, and other burnable objects.

Keep the engine away from flammables and other hazardous materials.

Keep away from hot parts. The muffler and other engine parts become very hot; use caution.

Do not touch the spark plug and ignition cable when starting and operating the engine.

Check fuel hoses and joints for looseness and fuel leakage before each use.

Check bolts and nuts for looseness before each use. A loose bolt or nut may cause serious engine problems.

Always refuel outdoors. Never refuel indoors or in a poorly ventilated area.

Never store the machine with fuel in the fuel tank inside a building where ignition sources are present, such as hot water and space heaters, clothes dryers, and the like.

If the fuel tank has to be drained, do this outdoors.

To reduce the risk of fire and burn injury, handle fuel with care. It is highly flammable.

Do not smoke while handling fuel.

Add fuel before starting the engine. Never remove the cap of the fuel tank or add fuel while the engine is running or when the engine is hot.

Loosen fuel cap slowly to release pressure and to keep fuel from escaping around the cap.

Replace all fuel tank and container caps securely.

Wipe spilled fuel from the unit. Move 30 feet away from refueling site before starting engine.

If fuel is spilled, do not attempt to start the engine but move the machine away from the area of spillage and avoid creating any source of ignition until fuel vapors have dissipated.

Never attempt to burn off spilled fuel under any circumstances.

Before storing, allow the engine to cool.

Store fuel in a cool, well-ventilated area, safely away from spark and/or flame-producing equipment.

Store fuel in containers specifically designed for this purpose.

Empty fuel tank and restrain the unit from moving before transporting in a vehicle.

When servicing use only identical replacement parts. Use of any other parts may create a hazard or cause product damage.

ONLY use cold water.

Make sure minimum clearance of 3 feet is maintained from combustible materials.

Save these instructions. Refer to them frequently and use them to instruct other users. If you loan someone this tool, loan them these instructions also.

4

Image 4
Contents OPERATOR’S Manual Save this Manual for Future ReferenceTable of Contents IntroductionImportant Safety Instructions Read ALL Instructions Before Using this ProductSpecific Safety Rules Symbols Symbol Name DESIGNATION/EXPLANATIONSymbol Signal Meaning ServiceAuthorized Service Center for repair. When servic Features Product SpecificationsFeatures AssemblyRaising and Lowering the Telescoping Handle Handle TubeAdding OIL to the Engine Adding Gasoline to the Fuel TankOIL CAP Dipstick Fuel CAPAssembling the Spray Wand Connecting High Pressure Hose to Spray Wand AssemblyTo attach the spray wand extension Connecting the High Pressure Hose to Pump Connecting the Garden Hose to Pressure WasherTo connect the garden hose to the machine Water Intake Garden Hose ScreenPrimer Bulb Recoil Starter OFF Switch OperationApplications Starting and Stopping the Pressure WasherUsing the Spray Wand Trigger Selecting the Right QUICK-CONNECT Nozzle for the JOBNozzle ClickMoving the Pressure Washer Storing the Pressure WasherWashing with Detergent Rinsing with the Pressure WasherMaintenance General MaintenanceCleaning the AIR Filter AIR Filter CoverRemoving the Wheel Assembly Nozzle MaintenanceNozzle Cleaning Tool Checking a Fouled Spark PlugPump Maintenance Changing the OILPreparing for USE After Storage Container OIL Drain PlugTroubleshooting Problem Cause SolutionPage Warranty Limited NON-ENGINE Warranty StatementService California Proposition