PRECAUTIONS
On Safety
•Should any solid object or liquid fall into the set, disconnect the power, and have it checked by qualified personnel before operating it any further.
Notes on Cassette
•Break off the cassette tab from side A or B to prevent accidental recording. If you want to reuse the tape for recording, cover the broken tab with adhesive tape.
On Placement
•Do not leave the set in a location near heat source, or in a place subject to direct sunlight, excessive dust or mechanical shock.
•Do not place the set on an inclined or unstable place.
•Do not place anything within 1 inch of the back of the cabinet. The ventilation holes must be unobstructed for the set to operate properly and prolong the life of its components.
•If the set is left in a car parked in the sun, be sure to choose a location in the car where the set will not be subjected to the direct rays of the sun.
•Since a strong magnet is used for the speakers, keep personal credit cards using magnetic coding or spring- wound watches away from the set to prevent possible damage from the magnet.
On Power Sources
•For battery operation, use 4 size “C” batteries. We recommend alkaline batteries for longer life.
•When the batteries are not to be used, remove them to avoid damage that can be caused by battery leakage or corrosion.
•The nameplate indicating operating voltage, power consumption, etc. is located at the back of the set.
Side A
Tab for side A
Tab for side B
•To record on a tape with its tab broken off, cover the respective tab hole for side A or B with adhesive tape.
•Use of a cassette with more than 90 minutes, such as
•To reduce the chances of tape jamming or tangling, you should check that there are no loose layers of tape visible through the cassette center window. If any, tighten these loose layers of tape using a pencil before inserting the cassette into the set.
10IB-CT995(NL)-WM-E-011004