Insure proper earthing exists before using.
Earthing plug

WARNING!

HOW TO CONNECT ELECTRICITY

The power cord of this appliance is equipped with an earthing plug which mates with a standard earthed wall outlet to minimize the possibility of electric shock hazard from this appliance.

Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly earthed.

Where an unearthed wall outlet is encountered, it is your personal responsibility and obligation to have it replaced with a properly earthed wall outlet.

The refrigerator should always be plugged into

its own individual electrical outlet. This provides the best performance

and also prevents overloading house

wiring circuits which could cause a fire hazard from overheated wires. Please refer to the rating plate on the refrigerator for the correct voltage, wattage and frequency. If the product plug does not fit your outlet, the product should be fitted with a new plug.

IMPORTANT: The refitting of electric plugs and cables should be done by a qualified technician or service agent. In some countries the refitting of electric plugs and cables is only permitted when the work is completed by a qualified technician.

If the power supply cord becomes damaged, it must be replaced by a qualified service agent in order to avoid a safety hazard.

Never unplug your refrigerator by pulling on the power cord. Always grip plug firmly and pull straight out from the outlet.

Repair or replace immediately all power cords that have become frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either end.

When moving the refrigerator away from the wall, be careful not to roll over or damage the power cord.

Mains lead replacement

If the mains lead on your refrigerator needs replacing at any time, it must be replaced by a special lead which is obtainable from your local dealer. A charge will be made for the replacement of the mains lead if you have damaged the lead.

The refrigerator must be positioned so that the plug is accessible.

READ AND FOLLOW THIS SAFETY INFORMATION CAREFULLY.

SAVE THESE INSTRUCTIONS

3

Page 2 Page 4
Page 3
Image 3
GE 21, 23, 25, 27, 29 installation instructions HOW to Connect Electricity, Mains lead replacement
Page 2 Page 4

21, 23, 25, 27, 29 specifications

The GE 21, 23, 25, 27, and 29 series of locomotives represent a significant evolution in diesel-electric technology, showcasing General Electric's commitment to innovation and performance in the rail industry. These models, produced from the late 20th century to the early 21st century, are designed to meet a variety of operational needs.

The GE 21, introduced in the early 1990s, was notable for its efficiency and reliability. It utilized a 12-cylinder engine coupled with GE's innovative software systems, allowing for enhanced fuel economy and lower emissions. The locomotive's modular design enabled easy maintenance, which was a significant advantage for rail operators looking to minimize downtime.

Moving to the GE 23, this model offered increased power and improved traction systems, reflecting the industry's demand for stronger and faster trains. With an upgraded traction control system, the GE 23 provided better performance on challenging grades and under various load conditions. Its spacious cab and ergonomic controls also emphasized operator comfort and productivity.

The GE 25 built upon the successes of its predecessors, featuring advanced microprocessor controls and a more robust engine. This model was designed with higher horsepower, making it suitable for heavy freight operations. The GE 25’s aerodynamic design reduced drag, enhancing fuel efficiency during long hauls. Additionally, the locomotive included state-of-the-art diagnostic systems, allowing for real-time monitoring of performance metrics.

In the evolution of these series, the GE 27 introduced even more technological advancements, including improved lightweight materials and enhanced safety features. This model could accommodate various cargo types and was compatible with modern signaling systems, making it versatile for different rail networks. The GE 27 was designed with sustainability in mind, further reducing emissions and adhering to stricter environmental regulations.

Finally, the GE 29 series marked a major leap forward with the integration of cutting-edge digital technology. These locomotives featured predictive maintenance capabilities, allowing operators to foresee potential mechanical issues before they resulted in failures. The GE 29 series also placed a strong emphasis on energy efficiency, incorporating regenerative braking systems that harness energy during braking for reuse.

Overall, the GE 21, 23, 25, 27, and 29 locomotives reflect General Electric’s ability to innovate continually, combining power, efficiency, and advanced technology to meet the changing demands of the rail industry. Each model brought unique features and improvements, ultimately enhancing the performance and reliability of rail freight services.
Top Page Image Contents