About the refrigerator doors.

Refrigerator Doors

The refrigerator doors may feel different than the ones you are used to. The special door opening/closing feature makes sure the doors close all the way and are securely sealed.

When opening and closing the door you will notice a stop position. If the door is opened past this stop point, the door will remain open to allow you to load and unload food more easily. When the door is only partially open, it will automatically close.

The resistance you feel at the stop position will be reduced as the door is loaded with food.

When the door is only partially open it will automatically close.

Beyond this stop the door will stay open.

About the shelves and bins.

Not all features are on all models.

Snugger

Refrigerator Door Bins and Freezer Door Tilt-Out Bins

Refrigerator bin

Freezer tilt-out bin

Large Bins

The larger refrigerator door bins and freezer tilt-out door bins are adjustable.

To remove: Lift the front of the bin straight up, then lift up and out.

To replace or relocate: Engage the back side of the bin in the molded supports of the door. Then push down on the front of the bin. Bin will lock in place.

Small Bins

To remove: Lift the front of the bin straight up then out.

To replace: Position the bin above the rectangular molded supports on the door. Then slide the bin down onto the support to lock it in place.

The snugger helps prevent tipping, spilling or sliding of small items stored on the door shelf. Place a finger on either side of the snugger near the rear and move it back and forth to fit your needs.

Bottle retainer

10

Bottle Retainer

The bottle retainers are adjustable and keep tall items from tipping over.

To remove: Lift the front of the retainer straight up, then lift it up.

To replace or relocate: Engage the back of the bottle retainer in the molded supports on the door. Then push down on the front of the bottle retainer.

Page 9 Page 11
Page 10
Image 10
GE 21, 23, 25, 27, 29 About the refrigerator doors, About the shelves and bins, Refrigerator Doors, Bottle Retainer
Page 9 Page 11

21, 23, 25, 27, 29 specifications

The GE 21, 23, 25, 27, and 29 series of locomotives represent a significant evolution in diesel-electric technology, showcasing General Electric's commitment to innovation and performance in the rail industry. These models, produced from the late 20th century to the early 21st century, are designed to meet a variety of operational needs.

The GE 21, introduced in the early 1990s, was notable for its efficiency and reliability. It utilized a 12-cylinder engine coupled with GE's innovative software systems, allowing for enhanced fuel economy and lower emissions. The locomotive's modular design enabled easy maintenance, which was a significant advantage for rail operators looking to minimize downtime.

Moving to the GE 23, this model offered increased power and improved traction systems, reflecting the industry's demand for stronger and faster trains. With an upgraded traction control system, the GE 23 provided better performance on challenging grades and under various load conditions. Its spacious cab and ergonomic controls also emphasized operator comfort and productivity.

The GE 25 built upon the successes of its predecessors, featuring advanced microprocessor controls and a more robust engine. This model was designed with higher horsepower, making it suitable for heavy freight operations. The GE 25’s aerodynamic design reduced drag, enhancing fuel efficiency during long hauls. Additionally, the locomotive included state-of-the-art diagnostic systems, allowing for real-time monitoring of performance metrics.

In the evolution of these series, the GE 27 introduced even more technological advancements, including improved lightweight materials and enhanced safety features. This model could accommodate various cargo types and was compatible with modern signaling systems, making it versatile for different rail networks. The GE 27 was designed with sustainability in mind, further reducing emissions and adhering to stricter environmental regulations.

Finally, the GE 29 series marked a major leap forward with the integration of cutting-edge digital technology. These locomotives featured predictive maintenance capabilities, allowing operators to foresee potential mechanical issues before they resulted in failures. The GE 29 series also placed a strong emphasis on energy efficiency, incorporating regenerative braking systems that harness energy during braking for reuse.

Overall, the GE 21, 23, 25, 27, and 29 locomotives reflect General Electric’s ability to innovate continually, combining power, efficiency, and advanced technology to meet the changing demands of the rail industry. Each model brought unique features and improvements, ultimately enhancing the performance and reliability of rail freight services.
Top Page Image Contents