Slide-Out Spillproof Shelf

Press tab and pull shelf forward to remove

The slide-out spillproof shelf allows you to reach items stored behind others. The special edges are designed to help prevent spills from dripping to lower shelves.

To remove:

Slide the shelf out until it reaches the stop, then press down on the tab and slide the shelf straight out.

To replace or relocate:

Line the shelf up with the supports and slide it into place. The shelf can be repositioned when the door is at 90° or more. To reposition the shelf, slide the shelf past the stops and angle downward. Slide shelf down to the desired

position, line up with the supports and slide into place.

Make sure you push the shelves all the way back in before you close the door.

QuickSpace™ Shelf

This shelf splits in half and slides under itself for storage of tall items on the shelf below.

This shelf can be removed and replaced or relocated just like Slide-Out Spillproof Shelves.

On some models, this shelf can not be used in the lowest position.

Removable Beverage Rack

The beverage rack is designed to hold a bottle on its side. It can be attached to any slide-out shelf.

To install:

Line up the large part of the slots on the top of the rack with the tabs under the shelf.

Then slide the rack back to lock it in place.

Door Wine/Beverage Rack (on some models)

This rack holds up to 5 cans, one bottle of wine or one 2-liter bottle of soda.

The rack hangs from the sides of the dairy bin.

To remove:

Empty the wine/beverage rack.

Holding the bottom of the dairy bin, lift the front straight up, then lift up and out.

To detach the rack from the dairy bin, pull the rack’s side wires out of the holes on each side of the dairy bin.

To replace:

Reattach the rack to the sides of the bin.

Engage the back side of the bin in the molded supports on the door. Then push down on the front of the bin. The bin will lock into place.

21, 23, 25, 27, 29 specifications

The GE 21, 23, 25, 27, and 29 series of locomotives represent a significant evolution in diesel-electric technology, showcasing General Electric's commitment to innovation and performance in the rail industry. These models, produced from the late 20th century to the early 21st century, are designed to meet a variety of operational needs.

The GE 21, introduced in the early 1990s, was notable for its efficiency and reliability. It utilized a 12-cylinder engine coupled with GE's innovative software systems, allowing for enhanced fuel economy and lower emissions. The locomotive's modular design enabled easy maintenance, which was a significant advantage for rail operators looking to minimize downtime.

Moving to the GE 23, this model offered increased power and improved traction systems, reflecting the industry's demand for stronger and faster trains. With an upgraded traction control system, the GE 23 provided better performance on challenging grades and under various load conditions. Its spacious cab and ergonomic controls also emphasized operator comfort and productivity.

The GE 25 built upon the successes of its predecessors, featuring advanced microprocessor controls and a more robust engine. This model was designed with higher horsepower, making it suitable for heavy freight operations. The GE 25’s aerodynamic design reduced drag, enhancing fuel efficiency during long hauls. Additionally, the locomotive included state-of-the-art diagnostic systems, allowing for real-time monitoring of performance metrics.

In the evolution of these series, the GE 27 introduced even more technological advancements, including improved lightweight materials and enhanced safety features. This model could accommodate various cargo types and was compatible with modern signaling systems, making it versatile for different rail networks. The GE 27 was designed with sustainability in mind, further reducing emissions and adhering to stricter environmental regulations.

Finally, the GE 29 series marked a major leap forward with the integration of cutting-edge digital technology. These locomotives featured predictive maintenance capabilities, allowing operators to foresee potential mechanical issues before they resulted in failures. The GE 29 series also placed a strong emphasis on energy efficiency, incorporating regenerative braking systems that harness energy during braking for reuse.

Overall, the GE 21, 23, 25, 27, and 29 locomotives reflect General Electric’s ability to innovate continually, combining power, efficiency, and advanced technology to meet the changing demands of the rail industry. Each model brought unique features and improvements, ultimately enhancing the performance and reliability of rail freight services.

GE 21, 23, 25, 27, 29 Slide-Out Spillproof Shelf, QuickSpace Shelf, Removable Beverage Rack

Models: 21, 23, 25, 27, 29