INTRODUCTION
The Diamond Audio D3 Series Amplifiers incorporate the following features:
Full frequency response with low distortion and exceptional signal to noise performance. Advanced circuit design that features stereo, mono and mixed mode operation for use in a variety of systems.
Variable
Variable bass boost circuit to reinforce low frequency signals.
Adjustable input level controls with ground loop isolation accepting a wide range of input
signals.
Remote
Low profile, compact size for space limited installs
TABLE OF CONTENTS
Description | 1 |
Specifications | 2 |
Power and Speaker Connections | 2 |
Input Connections and Audio Control | 3 |
Setting the Gain | 4 |
Setting the Crossover | 4 |
Setting the Bass Boost | 4 |
Troubleshooting | 4 |
System Diagrams | 5 |
DESCRIPTION
The D3 Series Amplifiers provide a wide range of power and features that make them an excellent choice for a variety of car audio sound system configurations.
D3 Amplifiers use an unregulated power supply for good control of output power. This power supply design helps yield maximum power transfer with a minimum of heat loss.
On board noise filtration is used to keep unwanted noise from leaking into the system from the amplifier. Each D3 amplifier comes complete with thermal, short, and load protection circuits as well.
1