Working with detergents

Detergents can only be applied at low pressure (-).

Step 1

Install the Vario spray wand into the trigger gun. Set the Vario spray wand to the low pressure setting (–) by turning the wand collar. The wand must be set in the low pressure (–) position to apply detergents.

For best results see Cleaning Tips on pages 9 & 10 for specific information on how to clean different surfaces.

Always Use Karcher

Detergents for Best Results.

Karcher biodegradable detergents are“specially formulated to protect the environment and your pressure washer. Special formula won’t clog the suction tube filter and will protect the internal parts of the pressure washer for a longer life. For Karcher Detergents, check your retailer or call:

Step 2

Fill the detergent tank with Kärcher detergent. Place the filter end of detergent suction tube into the detergent tank

Step 3

Turn on the pressure washer.

Pull trigger to operate unit: Liquid detergent is drawn into the unit and mixed with water. Apply detergent to work area. Do not allow detergent to dry on surface

In USA call:

1-800-537-4129

or visit our website:

www.karcher-usa.com

The following Karcher detergents are available:

-----------------------------------------------------------

One Gallon ready to use

• Vehicle Wash	• Degreaser
• All Purpose Cleaner	• House Wash

•Deck Wash

-----------------------------------------------------------

Detergent Concentrate Tablets

(10 Pack; makes 1 1/4 gallon RTU product)

•	All Purpose	•	Degreaser
•	Deck and patio	•	Windows and Siding

-----------------------------------------------------------

Caution

Never use:

•Bleach, Chlorine products and other corrosive chemicals

•Liquids containing solvents

(i.e., paint thinners, gasoline, oils)

•Tri-sodium phosphate products

•Ammonia products

•Acid-based products

These chemicals will harm the unit and will damage the surface being cleaned.