Craftsman 580.76201 owner manual Ring Maintenance, To remove a worn or damaged O-Ring

Page 14

Use the wire included in the kit or a small paper clip to free the foreign materials clogging or restricting the nozzle.

Insert wire into the nozzle orifice, and tum it back and forth to clear any obstruction.

Remove additional debris by back flushing water

supply through wand. Back flush between 30 to 60 seconds. Turn wand to stream spray and move nozzle from low to high pressure while flushing.

O-RING MAINTENANCE

Through the normal operation of your pressure washer, O-Rings, which keep the connections of the hoses and gun tight and leak-free may become worn or damaged.

Provided with your pressure washer is an O-Ring Maintenance Kit which provides replacement O-Rings,Rubber Washer and Quick Connect filter.

To remove a worn or damaged O-Ring:

•Use a small flathead screwdriver to get underneath the O-Ring and pry it off.

Parts in the O-Ring Kit Include:

•2 O-Rings(p/n B2726) for each end of the nozzle extension.

2 O-Rings (p/n B2264) for the ends of the high pressure hose.

•Reinstall orifice into nozzle. DO NOT overtighten.

•Reconnect nozzle to nozzle extension.

•Reconnect with the water supply, turn ON the water and start the engine.

•Test the pressure washer by operating with nozzle in the high and the low pressure positions.

•1 Rubber Washer (p/n B2385) for the inside of the Male Quick-Connect.

•1 O-Ring(p/n B2386) for the outside of the Male Quick-Connect.

O

•1 Water Inlet Screen (p/n B2384) for the Female Quick-Connect.

0

NOTE: THE ABOVE TWO O-RiNGS ARE CLOSE IN SIZE.

Please match carefully to assure proper O-Ringusage.

]4

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Hours Mon.- Fri a.m. to 5 p.m. CST Pressure WasherCustomer Limited ONE Year Warranty on Craftsman High Pressure Washer SEARS, Roebuck and CO., D/817 WA, Hoffman Estates, ILRead this manual and follow all Safety Maintenance and StorageHOW to Remove the High Pressure Washer from Carton Carton ContentsPRE-OPERATIONAL Checklist Know Your High Pressure Washer PressureApplying Detergent and Cleaning with Adjustable Nozzle HOW to USE Your Pressure WasherHOW to USE the Adjustable Nozzle Rinsing with the Pressure Washer HOW to Adjust Pressure Using the Pressure Control KnobHOW to USE the Turbo Nozzle Engine OperationCould causea malfunctionin which you could be Before Starting the Pressure WasherADD Engine OIL SAE Viscosity GradesTips Disassembled Male end Female endSiphoning Customer Responsibilities Product SpecificationsHourly Operating Interval Service Dates General RecommendationsPressure Washer Maintenance Engine MaintenanceNozzle Maintenance Servicing the AIR CleanerCLEAN/REPLACE Spark Plug Ring Maintenance To remove a worn or damaged O-RingAfter Each USE Problem Cause Correction Nozzlein low pressuremodePage Crankshaft Craftsman 2000 PSI High Pressure WasherCylinder Barrel Rankcase Cover Ref NoTeikoku PistonRef No Description FAN CoverCamshaft Recoil StarterPa No CarburetorFloat Set Descrigtion AIR CleanerMuffler Pad No LYWHEEL& Ignition Coil Ref N DescrControli CONTROL2 CONTROL3 Ref No Descrrr@tionQty Mark Ref NoVenturi Assembly Flathead Pump93667 9387197606 Page DESORIFrlON Partno QTYDescription QTY InstructionsPart

580.76201 specifications

The Craftsman 580.76201 is a versatile and powerful gas-powered leaf blower designed for home gardeners and landscaping enthusiasts alike. Renowned for its reliability and efficiency, this tool stands out in the market for its robust features and innovative technologies.

At the heart of the Craftsman 580.76201 is its powerful 27cc 2-cycle engine, which delivers an impressive air volume and speed. With a maximum air speed of approximately 150 mph and airflow of 400 CFM, it effortlessly clears leaves, grass clippings, and debris from sidewalks, driveways, and yards. This high-performance engine is designed for easier starting, allowing users to get right to work without the frustration often associated with gas-powered tools.

One of the key features of the Craftsman 580.76201 is its ergonomic design. Weighing around 8.9 pounds, the blower is lightweight enough for extended use without causing excessive fatigue. The adjustable nozzle allows users to easily switch between concentrated and scattered airflow, making it perfect for both detailed work and broader applications. Additionally, the padded shoulder strap and handle are designed for comfort, providing an optimal grip that reduces vibrations and enhances control during operation.

This leaf blower also incorporates advanced technology that optimizes fuel efficiency and minimizes emissions. The mix of air and fuel is specially calibrated to ensure maximum performance while adhering to environmental regulations. This dual-focus on power and eco-friendliness is increasingly important for today’s environmentally conscious consumers.

Another highlight of the Craftsman 580.76201 is its ease of maintenance. The air filter and spark plug are easily accessible, making routine checks and replacements straightforward. The unit's design prioritizes user convenience, enabling fast cleaning and servicing, which prolongs the lifespan of the tool.

In conclusion, the Craftsman 580.76201 combines power, comfort, and ease of maintenance in a single robust package. It is ideal for homeowners looking for an efficient leaf blower that can handle various outdoor tasks, from light cleaning to more extensive yard work. With its solid performance and user-friendly design, this model is a reliable choice for tackling autumn leaves or any debris clearing needs throughout the year.
Top Page Image Contents