HOW to USE Your Pressure Washer

-IF YOU HAVE ANY PROBLEMS operating your pressure washer, please call the pressure washer helpline at 1-800-222-3t 36.

A DANGER! NEVER adjust spray pattern I when spraying. NEVER put hands in front [ of spray nozzle to adjust spray pattem.

You could be injured.

HOW TO USE THE ADJUSTABLE NOZZLE

One of the nozzles you can attach to the nozzle extension (wand) is the adjustable nozzle. You can slide the adjustable nozzle forward and backward to adjust the spray pattern to be either high or low pres- sure. You can also twistthe adjustable nozzle from side to side to adjust the spray so it is concentrated in a stream pattern or expanded into a fan pattern.

•Slide the nozzle forward to adjust the spray to low pressure mode. Slide the nozzle backward to achieve high pressure.

•If you get the spray nozzle too close, especially using high pressure mode, you may damage the cleaning surface.

APPLYING DETERGENT AND CLEANING WITH ADJUSTABLE NOZZLE

IMPORTANT: Use soaps designed specifically for pressure washers. Household detergents could damage the pump.

IMPORTANT: You must attach all hoses before you start the engine. Starting the engine without all the hoses connected and without the water tamed ON will damage the pump.

To apply detergent follow these steps:

Prepare the detergent solution as required by the job. (For the enclosed bottles of detergent, add the 8 ounces of chemical to a 1 gallon plastic bottle with handle (not included). Fill the rest of the bottle with water.)

•Hang the detergent solution on the "J" hook on the wire form on the guide handle.

•Place small filter on the chemical injection tube into the detergent container.

Slide nozzle backward	Slide nozzle forward
for high pressure	for low pressure	• Slide adjustable nozzle forward to low pressure
mode.	mode.	• Slide adjustable nozzle forward to low pressure
mode.	mode.

Twisting the nozzle adjusts the spray pattern from

mode. Detergent cannot be applied with nozzle in high pressure position.

a narrow pattern to a fan pattern.

Twist	nozzle counter-	Twist	nozzle
clockwise for fan		clockwise for narrow
spray	pattern,	spray	pattern.

Note: The first step involves applying an appropriate detergent/solvent solutionto penetrate and loosen grime. The detergent is applied at low pressure to

avoid splashing, overspraying and waste. Leave the solution on the surface for 3 to 5 minutes.

Review the use of the adjustable nozzle.

Connect garden hose to water inlet (see "TO START PRESSURE WASHER"), check that high pressure hose is connected to spray gun and pump (see ASSEMBLY), and start engine.

For cleaning, start at lower portion of area to be washed and work upward, using long, even, overlapping strokes.

Allow the detergent to soak in between 3 to 5 minutes before washing and rinsing.

For most effective cleaning, keep the spray nozzle

between 8 to 24 inches away from the cleaning surface.

Note: The second step involves cleaning the surface you have prepared with the pressure washer and then rinsing it clean.

580.76201 specifications

The Craftsman 580.76201 is a versatile and powerful gas-powered leaf blower designed for home gardeners and landscaping enthusiasts alike. Renowned for its reliability and efficiency, this tool stands out in the market for its robust features and innovative technologies.

At the heart of the Craftsman 580.76201 is its powerful 27cc 2-cycle engine, which delivers an impressive air volume and speed. With a maximum air speed of approximately 150 mph and airflow of 400 CFM, it effortlessly clears leaves, grass clippings, and debris from sidewalks, driveways, and yards. This high-performance engine is designed for easier starting, allowing users to get right to work without the frustration often associated with gas-powered tools.

One of the key features of the Craftsman 580.76201 is its ergonomic design. Weighing around 8.9 pounds, the blower is lightweight enough for extended use without causing excessive fatigue. The adjustable nozzle allows users to easily switch between concentrated and scattered airflow, making it perfect for both detailed work and broader applications. Additionally, the padded shoulder strap and handle are designed for comfort, providing an optimal grip that reduces vibrations and enhances control during operation.

This leaf blower also incorporates advanced technology that optimizes fuel efficiency and minimizes emissions. The mix of air and fuel is specially calibrated to ensure maximum performance while adhering to environmental regulations. This dual-focus on power and eco-friendliness is increasingly important for today’s environmentally conscious consumers.

Another highlight of the Craftsman 580.76201 is its ease of maintenance. The air filter and spark plug are easily accessible, making routine checks and replacements straightforward. The unit's design prioritizes user convenience, enabling fast cleaning and servicing, which prolongs the lifespan of the tool.

In conclusion, the Craftsman 580.76201 combines power, comfort, and ease of maintenance in a single robust package. It is ideal for homeowners looking for an efficient leaf blower that can handle various outdoor tasks, from light cleaning to more extensive yard work. With its solid performance and user-friendly design, this model is a reliable choice for tackling autumn leaves or any debris clearing needs throughout the year.