CARTON CONTENTS
The following parts are shipped loose with your cleaning system:
•Main Unit
•High Pressure Hose
•Parts Box (which includes items listed below)
•Spray Gun
•Wand Extens!on with Hi/Lo Adjustable Nozzle Engine Oil
•
*Manual Bag (which includes the items listed below)
•Owner's Manual
•Nozzle Cleaner Kit
•
• Tank Labels]
Become familiar with each piece before assembling the cleaning system. Check all contents against the illustration on Page 5. If any parts are missing or
damaged, call the Pressure Washer'Hf_lpli0e.;_t-
TO REMOVE PRESSURE WASHER FROM CARTON
•Remove loose parts and parts box included with your cleaning system.
•Slice two comers at guide handle end of carton from top to bottom so the panel can be folded downflat.
Lift the handle to
upright position and slide the locking caps into place
Raise guide handle, secure in place.
Roll the cleaning system out the open end of the carton.
Check carton for additional loose parts.
HOW TO SET UP YOUR PRESSURE WASHER
For the most part, your Craftsman High Pressure
Cleaning System has been assembled at the factory. You must, however, assemble the spray gun and attach the high pressure hose to the spray gun.
•CiJt the tie wraps on the high pressure hose and connect high pressure hose to gun. Tighten by hand.
•Attach nozzle extension to spray gun
•Place assembled spray gun on holder.
4