6 After using your pressure washer
6.1 Storing the washer
,
The machine should be sto- red in a
Pump, hose and accessories should always be emptied of water prior to storing as follows:
1.Stop the machine (turn the start/stop switch (1) to position"O") and detach wa- ter hose and accessory.
2.Restart the machine and activate the trigger. Let the machine run until no more water runs through the spray gun.
3.Stop the machine, unplug and wind up hose and cable.
4.Place spray handle, nozzles and other accessories in the holders of the machine.
Should the machine by mistake be frozen, it will be necessary to check it for damage.
NEVER START-UP A FROZEN MACHINE.
Frost damages are not covered by the guarantee!
6.2Winding up of electric cable and high pressure hose
To avoid accidents, the electric cable and the high pressure hose should always be winded
carefully up.
Wind up the electric cable on the appropriate hooks.
The lower hook can be turned to release the electric cable.
The high pressure washer comes in two models: A) with hook for storage of high pres- sure hose (14) - B) with a hose reel (13) , where the hose is pushed into the reel and after- wards winded up.
11