Nilfisk-ALTO C 120.4 Index, Safety Precautions and Warnings, Symbols used to mark in- structions

Page 2

Index

 

1

Safety precautions and warnings

3

2

Description

4

3

Before you start using your pressure washer

5

4

Operating your pressure washer

6

5

Fields of Application and working methods

9

6

After using your pressure washer

11

7

Maintenance

12

8

Trouble Shooting

14

9

Further information

15

10

EC Declaration of Conformity

17

1 Safety Precautions and Warnings

Symbols used to mark in- structions

Do not let children or people who have not read the instruc- tion manual operate the ma- chine.

Before starting up your machine please check it carefully for any defects. If you fi nd any, do not start up your machine and con- tact your Nilfi sk distributor.

Especially check:

zThe insulation of the electric cable should be faultless and without any cracks. If the electric cable is damaged, an authorized Nilfi sk distributor should replace it.

Before starting up your high-pres- sure washer for

the fi rst time, this instruction manual

must be read through carefully. Save the instructions for later use.

Safety instructions marked with this

symbol must be observed to pre-

vent danger to persons.

WARNING!

zHigh pressure jets can be dangerous. Never direct the water jet at persons, pets, live electrical equipment or the machine itself.

zNever try to clean clothes or footwear on yourself or other persons.

zHold the spray lance fi rmly with both hands. The spray lance is affected by a thrust of up to 16.4 N during ope– ration.

zThe operator and anyone in the immediate vicinity of the site of cleaning should take action to protect themselves from being struck by debris dislodged during operation. Wear goggles during opera- tion.

,This symbol is used to mark safety

instructions that must be observed

to prevent damage

to the machine and its per- formance.

This symbol indicates tips and instructions

to simplify work and to ensure a safe operation.

zNever use the machine in an environment where there could be a danger of explo- sion. If any doubt arises, please contact the local authorities.

zIt is not allowed to clean as- bestos-containing surfaces with high pressure.

zThis high pressure washer must not be used at tempera- tures below 0°C.

zNever let any persons stay under the product when stored on the wall.

WARNING!

Inadequate extension cables can be dangerous. Cables on drums should always be com- pletely unwinded to prevent the cable from overheating.

3

Image 2
Contents Nilfisk C Index Safety Precautions and WarningsSymbols used to mark in- structions Water connection Connection to Mains power connectionDescription ApplicationModel survey Before you start using your pressure washerOperation elements Specifications See model tagConnection of high pres- sure hose Operating your pressure washerMounting of quick coupling Mounting of high pres- sure hose IMPORTANT! Only use water without any Water connectionMin m and max m will Point the nozzle at the ground Pressure regulation on the Tornado PR- nozzleMechanical effect Fields of application and working methodsGeneral Task Accessories ‘Click Cleaning method Clean’ Typical fields of applicationAfter using your pressure washer Never START-UP a Frozen MachineWall storage MaintenanceStorage of accessories Page Trouble-shooting Warranty conditions Further informationAccessories EU Declaration of Conformity Page 128303202 a