General Notes
This manual has been written for persons with a basic knowledge of electrical engineering. At every step users who have already worked with measuring instruments can find the necessary commands in an overview. In addition, the following examples help to explain the operating steps.
Explanation of symbols
+
0
ë
Instructions shown with the warning symbol must be observed as otherwise the MSK 24 may be damaged or destroyed.
This symbol provides information on measuring functions and refers you to chapters containing further information on a subject.
This symbol is followed by an example of the measuring function just explained.
Here you will find an overview of the commands for the button combinations for the relevant measuring function.
[Button] | The button to be pressed on the receiver. |
Safety instructions
Always observe VDE safety regulations!
Use only fuses that have the same cutout characteristics.
Observe the following upper limits when supplying signals:
• HF input: max. 120 dBìV (60dBmV)
•Do not apply a DC voltage >22 V to the HF socket
•Do not apply a
Use only the power supply unit supplied to power the MSK 24.
A voltage of between 10 V and 20 V is available at the RF input socket depending on the programming. The source can supply up to 500 mA.
Parts supplied
1
1BNC measuring cable
1adapter for BNC socket to F socket
1adapter for BNC socket to F plug
1adapter for BNC socket to IEC socket
1adapter for BNC socket to IEC plug
6
