Maintenance
Changing the battery
∙Unscrew the two screws holding the straps of the leather case. Then unscrew the screw in the leather cover. Pull the receiver out of the leather case.
∙Now unscrew all screws on the top, bottom and sides of the metal housing. Pull the receiver out of the metal housing.
∙Remove the terminal clip from the battery. When changing the battery, beware of causing a short circuit between the terminal clips and the battery compartment.
∙Unscrew the four screws of the battery compartment from the underside of the frame.
∙Pull the battery out of the receiver from the back.
∙Insert the new battery and screw the receiver together in the reverse sequence. Beware that the polarity of the battery is correct.
Battery: YUASA
Customer service
Send the receiver to the following address for any service work:
ESC - GmbH
Bahnhofstr.108
83224 Grassau
Tel.: +49 (0)8641 /
Fax: +49 (0)8641 /
Internet:
45
