TV measurement
Frequency Display and Entering Frequency
To measure the level of a received TV signal, you must first enter the desired video carrier frequency.
You can enter the frequency in steps of 50 kHz from 45 MHz to 867 MHz.
Overview of commands in Entering Frequency (TV)
ë
Example
0
CH:175,25TV LEV: 65,0dBuV
Note
+
[SAT/TV] | Switch over to TV reception |
[0]...[9] | Enter frequency |
[ENTER] | Confirm entry |
[+]and
Enter frequency of 175.25 MHz: |
|
Press [2ndF] [CH/FRQ] | ..(Call up the frequency menus) |
Then [1] [7] [5] [./S] [2] [5] [ENTER] .. | .(Entering frequency) |
LC display:
∙Frequency: 175.25 MHz
∙Level: 65.0 dBìV
∙Mode: TV
Once you have called up the frequency menu, you only need to enter the figures to enter the frequency again.
The last frequency setting is retained even when the MSK 24 is switched off provided it was made using "numerical entries" and concluded with "MHz".
36
