Sat measurement, Standard Switch-Over | Kathrein MSK 24 specs

Sat measurement

Standard Switch-Over

In the SAT mode the MSK 24 can be set to receive the following types of signal:

∙analogue and

∙digital (DVB).

Overview of commands in Standard Switch-Over in SAT

[2ndF] [STD] Call up standard switch-over menu:

ë [1]...[2] Select the standard 1 = analogue

2 = digital (DVB)

Example

	0	Call up digital (DVB) standard:
		Press [2ndF] [STD]

		LC display:
		∙	1	= analogue standard
	1=ANALOG
	2=DIGITAL(DVB)	∙	2	= digital (DVB) standard

Standard menu


FR:1288.0MHz	SAT
LEV: 66.5dBuV	D

If you press button [2], you will leave the standard menu and the receiver will be set to DVB measurement.

A "D" appears in the display.

Display for DVB measurement

18

Image 18

Kathrein MSK 24 manual Sat measurement, Standard Switch-Over, Press 2ndF STD

Contents

Satellite / TV / Radio Test Receiver MSK Page Preface Validity of this manual Contents Spectrum measurement Technical Appendix General Notes Explanation of symbolsSafety instructions Parts supplied How it operates Overview of functions Block diagram of MSK Technical Data SAT 10 V...20 V, max mA Connections right side Operating and display elementsDisplay elements LC display Overview of the keyboard commands External DC voltage supply ConnectionsRF input socket Scart output Starting up Switching on the receiverSwitching off the receiver Software Accu LEV 48.5dBuV Settings in the setup menu Setup menuFactory settings Setup menu Mains and battery operation Battery operationMains operation Standard Switch-Over Sat measurementPress 2ndF STD Overview of commands in Entering Frequency SAT Frequency Display and Entering FrequencyPress 1 5 0 8 E Nter LEV .dBuV Level MeasurementLevel Overflow and Underflow LEV dBuV Change the measuring range of the bar display 2ndF Scan Switch over to Scan operationTracking Satellites Calling up the Scan function Overview of commands in Tracking Tracking for Single Frequencies Audio Carrier Frequency Button Frequency in MHz Bandwidth in kHzPress 2ndF SC LNB voltage Button LNB Voltage and 22 kHz / 60 Hz Switch-OverOverview of commands in LNB Voltage Example LNB14,0V 150mA Press buttons 2ndF LNB Example LNB14,0V 22kHz 150mA DiSEqC Digital Satellite Equipment Control Parity bit Overview of commands in Framing Byte Press buttons 2ndF SAT-CTRL Overview of commands in Address Byte Hex byte Description Overview of commands in Command Byte Sat measurement Overview of commands in Simple DiSEqC Overview of commands in Data ByteOrbit Switch position Data Position Simple Tone Burst DiSEqC DiSEqC-SIMPLE Tone Burst Enter the figures 0 to SEC Vario-Satellite Equipment Control2ndF SAT-CTRL Call up the V-SEC menu Enter the letters A...F Button Overview of commands in Standard Switch-Over TV TV measurement=BG 2=L 3=DK =I 5=MN 6=M1 Channel Display and Entering Channel Switch over to TV receptionSwitch to special channel Enter the channel Then 1 7 5 ./S 2 5 Enter Level Measurement TV LEV.dBuV LEV-RANGE2 TV Example Press buttons 2ndF Level Standard Audio carrier Nicam Overview of commands in Measuring Audio Carrier FrequencyAudio Carrier Distance and Level SC 5.50MHz LEV -13.0dB LEV 58.5dBuV Nicam Measuring Audio Bit Error Rates Calling up Measuring Audio Bit Error RatesSC 5.85 MHz BER=2.145E-05 Press 2ndF FM FM measurement2ndF FM Then 9 9 ./S 2 5 Enter FR104,80MHz FM LEV¯¯¯.¯dBuV TV Spectrum Spectrum measurementSat Spectrum SAT-Full TV full Overview of commands in TV SpectrumFM Spectrum TV narrow Maintenance Changing the batteryCustomer service Signal-to-noise distance Technical Appendix+14.1 dB DiSEqC commands for Kathrein matrices Command set for Kathrein matrix 9xx-seriesCommand set for Kathrein matrix EXR Channel tables VHF-CCIR UHF-CCIR Channel and frequency table for L standard frequency in MHz VHF UHF III Channel and frequency table for I standard frequency in MHz Technical Appendix Technical Appendix Technical Appendix Page 936.1997/ZWT/PF Technical data subject to change