Nilfisk-ALTO C 120.4 Operating your pressure washer, Connection of high pres- sure hose

Page 5

3.3Mounting of quick coupling

3.4Mounting of high pres- sure hose

1.Screw the quick coupling tight on to the water inlet (2).

Note: The inlet ﬁ lter must al- ways be ﬁ tted in the water inlet pipe to ﬁ lter out sand, limestone and other impurities as these will damage the pump valves.

,Caution: Failure to ﬁ t the ﬁ lter will invalidate the guarantee.

Attach the high pressure hose

(4) to the spray gun (7).

Detach the high pressure hose by pressing the pawl (A).

4 Operating your pressure washer

4.1Connection of high pres- sure hose

1.Mount the high pressure hose on the outlet (3).

Image 5

Contents Nilﬁsk C Index Safety Precautions and WarningsSymbols used to mark in- structions Description Mains power connectionWater connection Connection to ApplicationOperation elements Before you start using your pressure washerModel survey Speciﬁcations See model tagConnection of high pres- sure hose Operating your pressure washerMounting of quick coupling Mounting of high pres- sure hose IMPORTANT! Only use water without any Water connectionMin m and max m will Pressure regulation on the Tornado PR- nozzle Point the nozzle at the groundMechanical effect Fields of application and working methodsGeneral Typical ﬁelds of application Task Accessories ‘Click Cleaning method Clean’Never START-UP a Frozen Machine After using your pressure washerWall storage MaintenanceStorage of accessories Page Trouble-shooting Further information Warranty conditionsAccessories EU Declaration of Conformity Page 128303202 a