Nilfisk-ALTO 107400337 C After using the cleaner, Switching off the cleaner, Lines, Below 0C 32F

Page 16

NEPTUNE 5 FA

6 After using the cleaner

6.1Switching off the cleaner

1.Turn the main switch to posi- tion „OFF“.

2.Turn off water supply at faucet.

3.Squeeze the spray gun trigger until the pressure has bled off.

4.Slide trigger lock to the locked position.

6.2Disconnecting supply 1. Turn the main switch to posi-

lines

tion „OFF“.

2.

Turn off water supply at

 

faucet.

3.

Squeeze the spray gun trigger

 

until the pressure has bled

 

off.

4.Slide trigger lock to the locked position.

5.Remove the water supply hose from the cleaner.

6.Remove power cord plug from the electrical supply.

6.3Rolling up the electrical cord and storing accessories

Risk of tripping!

To prevent accidents, always carefully roll up the power cord.

Machines with hose and/or cord reel:

1.Wind up the power cord as il- lustrated with the plug located in the center of the cord reel.

2.Wind up the high pressure hose as illustrated.

3.Place the spray lance into the spray lance storage.

6.4

Storing the cleaner

Store the cleaner in a dry heated

 

squeeze and release the trig-

 

(below 0°C (32°F))

location to protect against freez-

 

ger two or three times.

 

 

ing or protect per below instruc-

7. The machine is protected

 

 

tions:

 

 

against freezing when anti-

 

 

 

 

 

 

freeze mixture emerges from

 

 

1.

Remove the water supply

 

the spray gun.

 

 

 

hose from the cleaner.

 

8.

Lock the safety catch on the

 

 

2.

Remove the spray lance.

 

 

spray gun.

 

A

3.

Switch on the cleaner with the

9.

Switch off the cleaner.

 

4.

main switch in position

.

10.To avoid any possible dam-

 

 

Squeeze trigger of the spray

 

age, store the cleaner tempo-

 

 

 

gun.

 

 

rarily in a heated room before

 

 

5.

Gradually pour antifreeze (ap-

 

using it again.

 

 

 

prox. 5 litres) into the water

11.When the machine is put into

 

 

 

tank (A).

 

 

service again, the antifreeze

 

 

6.

While the pump is pulling the

 

solution can be collected and

 

 

 

mixture from the water tank,

 

stored for future use.

14

 

 

 

 

 

1) Options / model variants

Original instructions

Image 16
Contents Neptune 5 FA Operating Instructions Neptune 5 FA Contents Important safety instructions Symbols used to mark instructionsFor your own safety General Before starting the cleanerWater connection LiquidOperation Maintenance and repair TestingDescription Bypass valveBefore starting the cleaner Transport and assemblyOperating elements Set the brakeAntiscale Install Crank handle for high pressure hose reel/cord reelMachine flow L/h Pump size ml/h ˚dH Dosage Fill up fuel tank Connecting the water supply Connections Connecting the spray lance to the spray gunControl / Operation Electrical connectionWater volume Min Steam operation over 100C 212FUsing cleaning agents Applications and methods Vehicle Task Accessories Method Buildings and Equipment Task Accessories Method After using the cleaner Switching off the cleanerStoring the cleaner LinesMaintenance Checking the pump oil quality Changing the pump oilEmptying the fuel oil TankTroubleshooting Indications on DisplayOther Faults Indication lights on control panelFurther information GuaranteeUS only EU Declaration of Conformity EU Declaration of ConformityTechnical Data NeptuneHead Quarter