4.2Switching on the cleaner
4.2.1Cold water operation / Hot water operation (up to 100°C)
NOTE!
The cleaner switches off automatically twenty seconds after the spray gun has been closed. To start the cleaner again, squeeze the trigger and the machine will start automatically.
4.2.2Steam operation (over 100°C (212°F))
Beware of hot water and steam discharge up to 150°C when operating in steam stage.
4.3Pressure regulation (Tornado Lance)
4.4Pressure regulation (VarioPress Gun)1)
For safety reasons, never tie back or wedge open the trigger of the spray gun in open position during
operation. The trigger must be free to close when released, thus interrupting the flow of the water.
NEPTUNE 5 FA
1.Turn the main switch to posi-
tion 
(cold water).
Control electronics accomplishes a self check.
The Display shows for approx. 1 second
The motor starts. 
is ON.
2.Turn the main switch to posi-
tion 
(hot water).
3.Select temperature.
4.Unlock the spray gun and squeeze trigger.
5.The oil burner will light.
6.Release trigger and lock the spray gun when not in use.
1.Open cabinet (and service door if desired - see chapter 3.6, Step 1+2).
2.Turn the twist grip on the safety control block all the way to the left
3.Turn the main switch to position 
.
4.Select temperature (over 100°C (212°F)).
For special applications: replace the standard nozzle with the steam spray nozzle (accessory).
1.Turn the twist grip on the spray unit:
–High pressure =
clockwise (+) for high pres- sure
–Low pressure =
1.Turn the twist grip on the spray unit:
Water volume
(+) | |
min. | max. |
1) Options / model variants | 9 |
Original instructions