Poseidon 2
6 After using your pressure washer
6.1 Storing the washer
The machine should be sto- red in a
Pump, hose and accessories should always be emptied of water prior to storing as follows:
1.Stop the machine (turn the start/stop switch (1) to posi- tion “O” and detach water hose and accessory.
2.Restart the machine and activate the trigger. Let the machine run until no more water runs through the spray handle.
3.Stop the machine and un- plug. Wind the electric cable round the hooks placed on the side of the machine.
4.Separate spray handle and high pressure hose.
5.Machines without hose reel: Detach high pressure hose, coil it up and place it on the hose storage.
Machines with hose reel: Coil the high pressure hose up on the hose reel.
6.Place spray handle, nozzles and other accessories in the holders of the machine.
Should the machine by mistake be frozen, it will be necessary to check it for damage.
NEVER START-UP A FROZEN MACHINE.
Frost damages are not covered by the guarantee!
6.2Winding up of electric cable and high pressure hose
To avoid accidents, the electric cable and the high pressure hose should always be wound
up carefully.
1.Wind up the electric cable on the appropriate hooks. Built- in clip for good holding.
The lower hook can be turned to release the electric cable.
2.The high pressure washer comes in two models: A) with hook for storage of high pres- sure hose (14) - B) with a hose reel (13).
6.3 Storage of accessories
A |
The standard accessories (spray handle, spray lance
(A)and nozzle cleaning tool) can be stored on the pressure washer.
Original Instructions | 71 |