Nilfisk-ALTO 2 manual Operating your pressure washer, Mounting of quick coupling

Page 7

Poseidon 2

3.4Mounting of quick coupling

3.5Mounting of high pressure hose

1.Screw the quick coupling tight on to the water inlet (2).

Note: The inlet ﬁ lter must al- ways be ﬁ tted in the water inlet pipe to ﬁlter out sand, limestone and other impurities as these will damage the pump valves.

Caution: Failure to ﬁ t the ﬁ lter will

invalidate the guarantee.

Attach the high pressure hose

(4) to the spray handle (7).

4 Operating your pressure washer

4.1Connection of high pres- sure hose

Machines without hose reel: At- tach the high pressure hose (4) to the high pressure connection of the machine (3).

Only max. 7 m additional exten- sion hose can be added.

Machines with hose reel: Un- wind the high pressure hose completely.

66	Original Instructions

Image 7

Contents Operating instructions 170 Structions Safety Precautions and WarningsSymbols used to mark IndexOnly Poseidon 2-17 Mains power connectionSpeciﬁcations See model tag ApplicationOperation elements Model surveyMounting of hose hook only models without hose reel Mounting of holders for spray lanceMounting of hose reel handle only models with hose reel Connection of high pres- sure hose Operating your pressure washerMounting of quick coupling Mounting of high pressure hoseWater connection Telescopic handle Mounting of spray lancePressure regulation on the Flexopower Plus- spray lance Separate detergent container General Fields of application and working methodsMechanical effect Storage of accessories After using your pressure washerCleaning of machine vents Greasing of couplings MaintenanceCleaning of water inlet ﬁlter Cleaning of nozzleTrouble-shooting Further information Warranty conditionsRecycling the washer EU Declaration of Conformity Main Technical DataPage Head Quarter