Nilfisk-ALTO 2 manual Maintenance, Cleaning of water inlet filter, Cleaning of nozzle

Page 13

Poseidon 2

7 Maintenance

WARNING! Always disconnect the electrical plug from the socket prior to maintenance or cleaning.

To ensure a long and problem free working life, please take the following advice:

Wash off water hose, high pressure hose, spray lance and accessories before mounting.

Clean the connectors of dust and sand.

Clean the nozzles.

Any repair should always be made in an authorized work- shop with original spare parts.

7.1Cleaning of water inlet filter

Clean the water inlet filter regu- larly once a month or more fre- quently according to use. Care- fully loosen the filter with a pair of pliers and clean it. Check that it is intact before re-mounting it.

The inlet filter must always be

tted inside the water inlet pipe to fi lter out sand, limestone and other impurities, as they will damage the pump valves.

CAUTION: Failure to fi t the fi lter will invalidate the guarantee.

7.2 Cleaning of nozzle

A clogging up in the nozzle

causes a pump pressure which

is too high. This is why cleaning

is required immediately.

7.3Cleaning of machine vents

7.4Greasing of couplings

The machine should be kept clean so as to let cooling air

To ensure easy connection and that o-rings do not dry up, the

1.Stop the machine and dis- connect the nozzle.

2.Clean the nozzle. IMPOR- TANT: The cleaning tool (11) should only be used when the nozzle is detached!

3.Flush the nozzle backwards with water.

pass freely through the ma- chine vents.

couplings should be greased regularly.

72

Original Instructions

Image 13
Contents Operating instructions 170 Symbols used to mark Safety Precautions and WarningsIndex StructionsOnly Poseidon 2-17 Mains power connectionOperation elements ApplicationModel survey Specifications See model tagMounting of hose hook only models without hose reel Mounting of holders for spray lanceMounting of hose reel handle only models with hose reel Mounting of quick coupling Operating your pressure washerMounting of high pressure hose Connection of high pres- sure hoseWater connection Telescopic handle Mounting of spray lancePressure regulation on the Flexopower Plus- spray lance Separate detergent container General Fields of application and working methodsMechanical effect Storage of accessories After using your pressure washerCleaning of water inlet filter MaintenanceCleaning of nozzle Cleaning of machine vents Greasing of couplingsTrouble-shooting Further information Warranty conditionsRecycling the washer EU Declaration of Conformity Main Technical DataPage Head Quarter