Briggs & Stratton 2700PSI Preparing the Unit for Storage, Storing the Engine Engine Maintenance

Page 13

Snapper 2700 PSI Pressure Washer

Figure 17 — Backflushing the Nozzle Extension

6.Reinstall the nozzle and in-line filter into the nozzle extension. Do Not overtighten the nozzle with the allen wrench.

7.Reconnect the nozzle extension to the spray gun.

8.Reconnect the water supply, turn on the water, and start the engine.

9.Test the pressure washer by operating with each of the Quick Connect nozzles.

O–Ring Maintenance

Through the normal operation of your pressure washer, o–rings, which keep the connections of the hoses and spray gun tight and leak–free, may become worn or damaged.

An O–Ring Maintenance Kit is provided with your pressure washer. It includes replacement o-rings, rubber washer and water inlet filter. Refer to the instruction sheet provided in the kit to service your unit’s o-rings. Note that you will not use all of the parts in the kit.

To remove a worn or damaged o–ring:

•Use a small flathead screwdriver to get underneath the o-ring and pry it off.

PREPARING THE UNIT FOR STORAGE

Water should not remain in the unit for long periods of time. Sediments or minerals can deposit on pump parts and “freeze” pump action. If you do not plan to use the pressure washer for more than 30 days, follow this procedure:

1.Flush detergent siphoning tube by placing the filter into a pail of clean water while running pressure washer in low pressure mode. Flush for one to two minutes.

2.Shut off the engine and let it cool, then remove all hoses. Disconnect spark plug wire from spark plug.

3.Empty the pump of all pumped liquids by pulling the recoil handle about 6 times. This should remove most of the liquid in the pump.

4.Use PumpSaver to treat pump. This prevents freeze damage and lubricates pistons and seals.

NOTE: If PumpSaver is not available, draw RV antifreeze (non-alcohol) into the pump by pouring the solution into a 3-foot section of garden hose connected to inlet adapter and pulling recoil handle twice.

5.Store unit in a clean, dry area.

STORING THE ENGINE

See the engine owner’s manual for instructions on how to properly prepare the engine for storage.

ENGINE MAINTENANCE

See the engine owner’s manual for instructions on how to properly maintain the engine.

CAUTION! Avoid prolonged or repeated skin contact with used motor oil. Used motor oil has been shown to cause skin cancer in certain laboratory animals. Thoroughly wash exposed areas with soap and water. KEEP OUT OF REACH OF CHILDREN. DON'T POLLUTE. CONSERVE RESOURCES. RETURN USED OIL TO COLLECTION CENTERS.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents 2700PSI Contact the Local Snapper Service CenterSafety Rules Table of ContentsEquipment Description High pressure spray may damage fragile items including glass High Pressure Outlet with Quick Connect To Know Your Pressure WasherNozzle Extension with Quick Connect Allows you to Connect high pressure hoseRemove Pressure Washer from Carton Carton ContentsWasher for USE Attach Handle to the Pressure WasherTo install the oil dipstick Install Oil Dipstick on Pump Add GasolineAdd Engine Oil Connect Hose and Water Supply to Pump Checklist Before Starting EngineHow to Start Your Engine HOW to USE Your Pressure WasherHow to Use the Nozzles How to Stop Your Pressure WasherFollow these instructions to change nozzles Low PressurePressure Washer Rinsing Automatic Cool Down System Cleaning and Applying ChemicalTo apply detergent follow these steps General Maintenance Recommendations SpecificationsPressure Washer Maintenance Check Gun and Nozzle Extension Nozzle MaintenanceCheck In-Line Filter Purge Pump of Air ContaminantsRing Maintenance Storing the Engine Engine MaintenancePreparing the Unit for Storage To remove a worn or damaged o-ringSnapper 2700 PSI Pressure Washer Troubleshooting Exploded View Unit Qty Description Parts List UnitExploded View Pump Service Kits Parts List PumpExploded View Unloader Parts List Unloader Snapper 2700 PSI Pressure Washer Snapper 2700 PSI Pressure Washer Generac Portable Products, LLC Jefferson, Wisconsin U.S.A Snapper Owner Warranty Policy Effective October 1

2700PSI specifications

The Briggs & Stratton 2700PSI pressure washer is an outstanding choice for both residential and light commercial cleaning tasks. Known for its robust design and powerful performance, this pressure washer delivers a maximum pressure of 2700 PSI and a water flow rate of 2.3 GPM, making it capable of tackling a wide range of cleaning jobs, from driveways to decks and patios.

A key feature of the Briggs & Stratton 2700PSI is its reliable engine. Powered by a Briggs & Stratton OHV engine, this pressure washer provides enhanced durability and efficiency. The engine operates smoothly and is designed for easy starting, thanks to its patented Ready Start technology, which eliminates the need for a primer bulb. Users can expect hassle-free operation, reducing the frustration often associated with starting gas-powered equipment.

In terms of versatility, the 2700PSI model offers five interchangeable nozzles, allowing users to adjust the spray pattern according to the specific cleaning task at hand. Ranging from a focused, high-pressure stream to a wide, gentle spray, these nozzles ensure that users can clean delicate surfaces without causing damage while still achieving superior cleaning performance on tough stains.

One of the standout features of this pressure washer is its onboard detergent tank. This built-in tank allows for easy application of soap, making it ideal for breaking down grime and dirt on heavily soiled surfaces. The pressure washer also includes a soap nozzle, optimizing soap application for effective cleaning results.

The Briggs & Stratton 2700PSI is designed with user convenience in mind. It comes equipped with a 25-foot high-pressure hose, providing ample reach for various cleaning tasks without the need to constantly move the machine. Additionally, its compact and lightweight design, along with sturdy wheels, enhances portability, making it easy to transport and store when not in use.

Safety features are also integrated into the design of this pressure washer. The total stop system automatically shuts off the pump when the trigger is not engaged, prolonging the lifespan of the motor and pump while conserving energy.

Overall, the Briggs & Stratton 2700PSI pressure washer stands out as a powerful and efficient cleaning solution. With its reliable engine, versatile nozzles, onboard detergent tank, and thoughtful safety features, it represents a great investment for anyone looking to maintain their outdoor spaces with ease and effectiveness. Whether washing vehicles, cleaning siding, or prepping surfaces for painting, this pressure washer is equipped to handle the job efficiently, making it a popular choice among homeowners and professionals alike.
Top Page Image Contents