Briggs & Stratton 2700PSI Remove Pressure Washer from Carton, Washer for USE, Carton Contents

Page 5

Snapper 2700 PSI Pressure Washer

IMPORTANT: Read entire owner’s manual before you PREPARING PRESSURE attempt to assemble or operate your new pressure washer.

REMOVE PRESSURE

WASHER FROM

CARTON

•Remove all accessories and parts bag included with pressure washer.

•Slice two corners at the end of carton from top to bottom so the panel can be folded down flat, then remove all packing material.

•Roll pressure washer out of carton.

Carton Contents

Items in the carton include:

•Main unit

•High pressure hose

•Handle

•Pump oil dipstick (hanging on pump)

•Bottle of engine oil

•Safety goggles

•Spray gun with quick connect fitting

•Nozzle extension with quick connect fitting

•Accessory bag (includes the following):

•Owner’s registration card

•Nozzle cleaning kit

•Bag containing 5 multi–colored quick connect nozzles

•O–Ring maintenance kit

•Owner’s manual

•Engine manual

•Handle hardware, including one carriage bolt, one “L” bolt and 2 plastic knobs

If any of the above parts are missing or damaged, contact the local Snapper service center.

WASHER FOR USE

If you have any problems with the assembly of your pressure washer or if parts are missing or damaged, contact the local Snapper service center.

To prepare your pressure washer for operation, you will need to perform these tasks:

•Fill out and send in the registration card.

•Attach the handle to the main unit.

•Add oil to the engine.

•Add fuel to the fuel tank.

•Connect the high pressure hose to the spray gun and the pump.

•Connect the water supply to the pump.

•Connect nozzle extension to spray gun.

•Select and install desired nozzle.

Attach Handle to the Pressure Washer

•Place the handle onto the handle supports already connected to the main unit. Make sure the holes in the handle align with the holes on the handle supports. (Figure 1)

Figure 1 — Attach the Handle to the Base

Make sure the

 

 

Handle

holes on the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

handle are

 

 

 

 

 

 

 

aligned with the

 

 

 

 

 

 

 

holes on the

 

 

Handle

 

 

 

 

handle supports

 

 

 

 

 

 

 

 

 

 

 

Supports

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

NOTE: It may be necessary to move the handle supports from side to side in order to align the handle so it will slide over the handle supports.

•Insert the carriage bolt through the hole on the left side of the handle (viewing from rear of unit) and attach the plastic knob (Figure 2). Tighten the knob by hand.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents 2700PSI Contact the Local Snapper Service CenterEquipment Description Table of ContentsSafety Rules High pressure spray may damage fragile items including glass High Pressure Outlet with Quick Connect To Know Your Pressure WasherNozzle Extension with Quick Connect Allows you to Connect high pressure hoseRemove Pressure Washer from Carton Carton ContentsWasher for USE Attach Handle to the Pressure WasherAdd Engine Oil Install Oil Dipstick on Pump Add GasolineTo install the oil dipstick Connect Hose and Water Supply to Pump Checklist Before Starting EngineHow to Start Your Engine HOW to USE Your Pressure WasherHow to Use the Nozzles How to Stop Your Pressure WasherFollow these instructions to change nozzles Low PressureTo apply detergent follow these steps Cleaning and Applying ChemicalPressure Washer Rinsing Automatic Cool Down System Pressure Washer Maintenance SpecificationsGeneral Maintenance Recommendations Check Gun and Nozzle Extension Nozzle MaintenanceCheck In-Line Filter Purge Pump of Air ContaminantsRing Maintenance Storing the Engine Engine MaintenancePreparing the Unit for Storage To remove a worn or damaged o-ringSnapper 2700 PSI Pressure Washer Troubleshooting Exploded View Unit Qty Description Parts List UnitExploded View Pump Service Kits Parts List PumpExploded View Unloader Parts List Unloader Snapper 2700 PSI Pressure Washer Snapper 2700 PSI Pressure Washer Generac Portable Products, LLC Jefferson, Wisconsin U.S.A Snapper Owner Warranty Policy Effective October 1

2700PSI specifications

The Briggs & Stratton 2700PSI pressure washer is an outstanding choice for both residential and light commercial cleaning tasks. Known for its robust design and powerful performance, this pressure washer delivers a maximum pressure of 2700 PSI and a water flow rate of 2.3 GPM, making it capable of tackling a wide range of cleaning jobs, from driveways to decks and patios.

A key feature of the Briggs & Stratton 2700PSI is its reliable engine. Powered by a Briggs & Stratton OHV engine, this pressure washer provides enhanced durability and efficiency. The engine operates smoothly and is designed for easy starting, thanks to its patented Ready Start technology, which eliminates the need for a primer bulb. Users can expect hassle-free operation, reducing the frustration often associated with starting gas-powered equipment.

In terms of versatility, the 2700PSI model offers five interchangeable nozzles, allowing users to adjust the spray pattern according to the specific cleaning task at hand. Ranging from a focused, high-pressure stream to a wide, gentle spray, these nozzles ensure that users can clean delicate surfaces without causing damage while still achieving superior cleaning performance on tough stains.

One of the standout features of this pressure washer is its onboard detergent tank. This built-in tank allows for easy application of soap, making it ideal for breaking down grime and dirt on heavily soiled surfaces. The pressure washer also includes a soap nozzle, optimizing soap application for effective cleaning results.

The Briggs & Stratton 2700PSI is designed with user convenience in mind. It comes equipped with a 25-foot high-pressure hose, providing ample reach for various cleaning tasks without the need to constantly move the machine. Additionally, its compact and lightweight design, along with sturdy wheels, enhances portability, making it easy to transport and store when not in use.

Safety features are also integrated into the design of this pressure washer. The total stop system automatically shuts off the pump when the trigger is not engaged, prolonging the lifespan of the motor and pump while conserving energy.

Overall, the Briggs & Stratton 2700PSI pressure washer stands out as a powerful and efficient cleaning solution. With its reliable engine, versatile nozzles, onboard detergent tank, and thoughtful safety features, it represents a great investment for anyone looking to maintain their outdoor spaces with ease and effectiveness. Whether washing vehicles, cleaning siding, or prepping surfaces for painting, this pressure washer is equipped to handle the job efficiently, making it a popular choice among homeowners and professionals alike.
Top Page Image Contents